Member Since: 05 Feb 2009
Location: Lincolnshire
Posts: 937
Removal of the body
Has anyone done this?
Im after a few tips please
So far I have removed:-
Mounting Bolts
Wiring loom seperated from the body
Aircon pipes and heater pipes removed from bulkhead fittings
Brackets holding pipes etc. to body removed
Steering shaft removed from rack
Is there anything else before I attempt to lift the body of tomorrow evening
Last edited by matt_tdv6 on 11th Feb 2009 1:19 am. Edited 1 time in total
10th Feb 2009 11:52 pm
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
I would at least subscribe to GTR and look at the workshop manual
11th Feb 2009 12:07 am
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50934
Matt .....please re-register as "Dr. Frankenstein" 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
11th Feb 2009 12:09 am
matt_tdv6
Member Since: 05 Feb 2009
Location: Lincolnshire
Posts: 937
Chassis is bent on the front cross member and has pushed everything out of square
Rather than cut and weld a new piece in etc. i decided to buy another chassis
£300 for the chassis and a few mates will get this job done in no time
11th Feb 2009 12:16 am
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26702
Fantastic pioneering spirit Good luck and take some photos 8)
11th Feb 2009 12:19 am
matt_tdv6
Member Since: 05 Feb 2009
Location: Lincolnshire
Posts: 937
simon wrote:
I would at least subscribe to GTR and look at the workshop manual
How have you guys registered? Do you pay for a day or for the year?
11th Feb 2009 12:28 am
AndrewW
Member Since: 06 Aug 2007
Location: Saddleworth
Posts: 2302
matt_tdv6 wrote:
i decided to buy another chassis
£300 for the chassis and a few mates will get this job done in no time
2006 D3 finally swapped for a 2016 D4 Graphite in Graphite grey. No mods
11th Feb 2009 12:29 am
matt_tdv6
Member Since: 05 Feb 2009
Location: Lincolnshire
Posts: 937
Click image to enlarge
Click image to enlarge
Heres a few pics of all the damage removed and all the wiring on top of the engine waiting for body removal tomorrow
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated
11th Feb 2009 12:33 am
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
matt_tdv6 wrote:
simon wrote:
I would at least subscribe to GTR and look at the workshop manual
How have you guys registered? Do you pay for a day or for the year?
A day would be enough to save the pages as pdf or print them all.
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated As you slide down the banister of life
may no splinters point your way
Disco XXV
RRS2 Autobiography Dynamic MY16
Discovery Sport HSE Lux MY17
Evoque HSE Dynamic MY16 (Gone)
RRS2 Autobiography Dynamic MY14 (Lovely car but preferred the Disco!)
Disco 3 Tdv6 HSE MY05 (owned for 11 years and now gone)
Range Rover Sport HSE MY11 (Gone)
Freelander2 SE (Gone but the most reliable car we've ever owned)
Disco 2 V8 (Gone)
11th Feb 2009 12:39 am
matt_tdv6
Member Since: 05 Feb 2009
Location: Lincolnshire
Posts: 937
Is there a specific section for removing the body?
Can anyone point me to it please
11th Feb 2009 12:55 am
character
Member Since: 01 Jan 2008
Location: wiltshire
Posts: 5781
what about the crushed n/s roof /A pillar or is a reflection
When you get to the "hello, LRO classified ads? I've got an unfinished project for sale....." stage, can I have the wheels
Take enough pics as you go and you could make a mint from Haynes Manuals I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum