| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
gareth71
Member Since: 10 Apr 2016
Location: North-east Wales
Posts: 597
  
|
| Replacing tailgate microswitch |
|
The tailgate-opening microswitch on my D3 has finally started going intermittent, so needs a replacement. (More so due to having partially snapped one of the retaining flanges while trying to prise it out in order to put the rubber cover back on after investigating the issue and cleaning the actuating 'paddle' which presses onto the switch!)
Anyone had any success with one of the various options for replacement YUZ500020 switches available on eBay?
https://www.ebay.co.uk/sch/i.html?_from=R4...p;_sacat=0
|
 20th May 2024 5:30 pm |
|
|
sailormike
Member Since: 04 Apr 2007
Location: Norfolk
Posts: 180
  
|
I haven’t used one from eBay.
I did fit a genuine RR sport switch into my old D3 rear door as the RR switch is available on it’s own where as the D3 part was the whole black bit including number plate lights etc and a lot more expensive.
From memory I think I had to cut and crimp some connectors. Disco 4
Burstner motorhome
BMW 225e (only 1/2 way to electric)
|
| 20th May 2024 6:54 pm |
|
|
gareth71
Member Since: 10 Apr 2016
Location: North-east Wales
Posts: 597
|
Yup, aware of the RRS switch fitting (part no. is the same) and the need to splice the wires due to LR not making the D3 switch plug-and-play. Just wondering if anyone had experience with any one of the multitude of eBay sellers hawking the switches. Ordered one anyway, should be here in the next couple of days.
|
| 20th May 2024 10:37 pm |
|
|
paul123
Member Since: 22 Mar 2020
Location: norwich
Posts: 236
|
i am fitting one of the cheap ebay ones sometime this weekend. i will let you know how it goes. 2005 discovery 3 tdv6
1971 200 tdi 2 door range rover
300tdi defender 90 in bits needs lots of work
|
| 24th May 2024 7:25 am |
|
|
G7jtk
Member Since: 03 Jun 2014
Location: Prudhoe
Posts: 861
|
I fitted one from a Ford focus. Same thing. Half the price
|
| 24th May 2024 8:22 am |
|
|
paul123
Member Since: 22 Mar 2020
Location: norwich
Posts: 236
|
just fitted the ebay one. fit is a bit tight to get in but it works fine and has cured the problem of the top tailgate not opening 2005 discovery 3 tdv6
1971 200 tdi 2 door range rover
300tdi defender 90 in bits needs lots of work
|
| 24th May 2024 3:33 pm |
|
|
gareth71
Member Since: 10 Apr 2016
Location: North-east Wales
Posts: 597
|
Just as an update - after giving the original a bloody good clean, getting all the aluminium corrosion gunk out of the flappy paddle, squirting a bit of silicone lube into the pivot points and some contact cleaner onto the microswitch, it seems to be behaving itself. Impossible to get the rubber boot back on without prising the switch out of its position - which of course means that one corner is now held in with a dab of Araldite thanks to a broken fixing catch!
The replacement remains in its box, waiting for the original to finally fail...
|
| 24th May 2024 8:21 pm |
|
|
riverblanche
Member Since: 31 Aug 2010
Location: retford'ish
Posts: 2226
|
Hi,
have you programmed your key to do the boot release 
if I remember correctly when mine started to act up, cleaned it up but it failed some time later and I had not done the key so to open the tailgate you have to press both buttons on the dash while lifting the tailgate, which is difficult to do on your own 
I wired an microswitch in and all was good again later on, but it is worth sorting your key to release the tailgate
Transit! 2019
Gone D3 HSE 2008
Another Porsche Cayenne 2022
Gone Porsche Cayenne 2020
Gone RRS HSE Dynamic 2016
Gone RRS HSE LUX 2011
Gone RRS HSE 2006
Gone D3 SE 2.7 2008
gone D2 Td5 1999
I plan on living forever and so far so good !
Club DG Mclaren stuff
.
|
| 24th May 2024 9:18 pm |
|
|
AJVosper
Member Since: 19 Jan 2024
Location: Nottinghamshire
Posts: 8
|
Not sure if it's the same switch but I had to replace mine a few months ago, the new one only had 3 wires compared to the 4 on my car and a different plug/socket so I soldered the old plug on to the new switch and combined a couple if wires and alls fixed. Let me know if pics would help and I'll dig some out
It's really strange that something I did worked first time 😅 Previous Cars
Discover 2 TD5 Landmark - Gone :\
Discovery 2 V8 (Very broken!) - Gone 
TVR Chimeara 
|
| 30th May 2024 11:34 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
