Guineafowl21
Member Since: 03 May 2021
Location: Inverness
Posts: 12
  
|
| Reservoir and front cross link valve electrical failure |
|
As above - codes are C1A35-01 and C1A37-01, MIL lit and sometimes restricted performance.
I’m planning to trace the wiring for shorts/opens, but can’t find the locations of the RLM and front cross link valve on the Disco 4. Plenty of info about the 3.
Any help with this, wiring diagrams or other suggestions welcome.
|
 2nd Sep 2021 5:19 pm |
|
|
Guineafowl21
Member Since: 03 May 2021
Location: Inverness
Posts: 12
|
In the absence of any replies, here is what I found:
Suspension ECU is above the accelerator pedal, accessible by removing the panel under the steering wheel, and the plastic kick plate. Restricted access, but you can remove all the connectors for testing.
Front cross-link valve is under the right headlight, accessible by removing the RF wheel and arch liner. Mine had dropped off its mount and rubbed away a couple of wires.
Reservoir valve is in front of the compressor, and the wiring runs along the chassis rail to a large grey connector which you can get to by removing the left headlight. Mine had a corroded wire here.
|
| 8th Sep 2021 3:29 pm |
|
|
