Member Since: 24 Mar 2013
Location: Derbyshire
Posts: 2260
A sign of things to come with the D5?
Long drive today and sat behind various RRS2's and started to notice the cr@p allignment of the tailgate. If you follow the line above the number plate and look where it meets the corresponding line above the tail lights the left and right sides were very noticeably different on them all to the point I would have been asking the dealer to fix them. One was a good 1cm lower on one side.
Wonder if the new D5 will inherit these characteristics with similar body manufacturing being used? I would not have been happy with any of them.MY06 S - Gone but not forgotten
MY12 HSE - Gone
MY16 HSE Luxury - Sold
MY20 D5 HSE - Sold
Current RR L460 PHEV
3rd Mar 2016 7:38 pm
DaveT
Member Since: 01 Aug 2005
Location: Cornwall
Posts: 2576
Authentic Defender heritage Long succession of Disco's since 2001...
SIII Lightweight - neglected & rusting. Bulkhead, A panels, vent panel & outriggers now disintegrated - Next years project!
3rd Mar 2016 7:43 pm
Red Merle
Member Since: 30 Aug 2014
Location: Liskeard
Posts: 7441
There's no particular reason why a unitary construction car, on a modern, automated, production line should be anything other than consistent and accurate, so what you've see is hard to understand.2011 - 2015: 3 x FL2
2015 - 2017: 2 x D4
2017 to date: FFRR SDV8
2023 to date: 2 x FL2 as “second” cars 🙄
2021 to date: Hinckley built ‘14 Triumph Trophy 1200
2022 to date: Hinckley built ‘14 Triumph Trophy 1200 & sidecar!
(One of only two known to exist in the world!)
3rd Mar 2016 7:57 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Door and tailgate alignment are done by hand, you'll be surprised and possibly shocked how it is achieved, or not achieved as in the case above.
3rd Mar 2016 8:04 pm
Red Merle
Member Since: 30 Aug 2014
Location: Liskeard
Posts: 7441
I've been to a fair few production lines and seen it done, but it was only the Classic Mini line where such things were forced in to place with pry bars! 2011 - 2015: 3 x FL2
2015 - 2017: 2 x D4
2017 to date: FFRR SDV8
2023 to date: 2 x FL2 as “second” cars 🙄
2021 to date: Hinckley built ‘14 Triumph Trophy 1200
2022 to date: Hinckley built ‘14 Triumph Trophy 1200 & sidecar!
(One of only two known to exist in the world!)
3rd Mar 2016 8:40 pm
comedyharvey
Member Since: 03 Jul 2010
Location: Gloucestershire
Posts: 1727
When the last Defender was built and was being shown on the news there was a brief clip of the production line. One of the operatives closed the the drivers door, opened it, gave it a damned good twist against its hinges, closed it again and, now happy with the fit, let it roll on.
I've done that a few times in the past on my old Series 3 lightweight, I just never knew they started off that way.Arthur.
Comedy was a horse, Harvey a dog, both sadly gone. Thought I was choosing a password!
Currently;
Discovery 3 HSE 2009
101" Fwd. Control 1976
Nuffield 10/90 Tractor (10/60 with 6 cylinder conversion) 1964
Previously;
Series III Lightweight. 1976.
3rd Mar 2016 8:58 pm
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23824
The top section of the tailgate on both my previous MY14 and current MY15 needed adjustment by the dealer. As did the o/s passenger door on the MY14.
Pretty poor on vehicles costing in excess of £55k.2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
4th Mar 2016 1:29 pm
ste m
Member Since: 13 Apr 2015
Location: Liverpool
Posts: 129
Absolutely nothing wrong with aligning the doors like that, all material especially metal has a memory and you just have to adjust that at times, not only do you twist is but you will close the doors on special pads and also give them some slight persuasion with the said pad as well. Show me a manufacturer that doesn't do similar and ill show my ar5e in woolworths window haha.
Also I suppose the new one may have an electric tailgate, that will stop us from slamming our 60k dicoverys tailgates shut
4th Mar 2016 8:33 pm
Brian_DL13
Member Since: 25 Aug 2013
Location: Teesdale
Posts: 1418
> ill show my ar5e in woolworths window
Meaningless as Woollies no longer exists. Bet something real, please (pretty please)
4th Mar 2016 8:38 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Here you go, it's a few years old but the technique still carries.
4th Mar 2016 9:47 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50978
LT wrote:
Pretty poor on vehicles costing in excess of £55k.
.....and yet when you buy a new house \ have a building development done for £X00,000 you can spend weeks snagging their work 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
4th Mar 2016 9:53 pm
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23824
Oh yeah, that makes it okay then. It was a bit much to expect someone at the LR plant to open and close the tailgate to check it's aligned properly. 2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
4th Mar 2016 10:23 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50978
I'm not saying it makes it ok ...I'm saying your "value" comparison is rubbish 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
4th Mar 2016 10:25 pm
ste m
Member Since: 13 Apr 2015
Location: Liverpool
Posts: 129
LT wrote:
Oh yeah, that makes it okay then. It was a bit much to expect someone at the LR plant to open and close the tailgate to check it's aligned properly.
They do, they have specific lines for this very process, i do know that the front wing on a evoque looks odd as there is a plastic infill that makes the line look out of alignment. Maybe its something like this?
I do know when i had a DS for the day as a loan car from my dealer that the boot was that much out of line it looked like it was open. I definitely know it wouldn't of come out of the factory like that so maybe they'd done something to it themselves or it had had a knock
4th Mar 2016 10:31 pm
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23824
I must admit, I never did a visual check to see what the shut lines looked like on either of them. I just knew, from my previous D3 & D4, that it shouldn't be necessary for me to have to put a big effort into slamming the tailgate to get it to shut properly. The rest of the family weren't able to do it, so I'd have to.
It was an easy fix for the dealer and for me just part of buying process. I've yet to buy a new Discovery that didn't have minor little niggles.2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
work 
