Member Since: 04 Sep 2009
Location: Almunge
Posts: 137
Took out the compressor assembly, an easy job since previous person who did it didn't bother to install the top bolt. Take a look att the pictures in the gallery http://disco3.co.uk/gallery/index.php?cat=17082
Basically all looks fine, compressor runs fine when power is connected, dryer seems to let air through and all valves looks clean and free moving. Compressor assembly was dated May 2009 so is quite new.
Back under the D3 it started up and fills the system with air, but as soon as the computer is trying to release air from the system the fault comes back and the same fault codes. For some reason the system does not see a pressure drop when trying to release air. But if no pressure is present it seems to acknowledge that and give OK to the compressor to start.
Activating the exhaust valve with separate supply seems to work fine: http://www.youtube.com/watch?v=pQ-yy7cu1W0
Now I really miss the ability to run the valves individually and monitoring the pressure
16th Jan 2010 9:27 pm
1784
Member Since: 04 Sep 2009
Location: Almunge
Posts: 137
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum