cj730
Member Since: 26 Feb 2009
Location: lancashire
Posts: 108
|
Suspension Height Settings What should they be? |
|
Since replacing all the wishbone & anti-roll bar bushes with Polybushes! it seems to sit a bit high at the back
It measures about 500mm from under the arch to centre cap at the rear and about 466 at the front with about 5-10mm difference on each axle. Does anyone know what they should be and how to adjust if needed?
Thanks
Carl Disco 3 TDV6 HSE Auto Bonatti Grey
Disco 3 TDV6 SE Auto Zambezi Silver
Disco 1 300 TDI Auto Willow Green
|
14th Jul 2010 11:45 am |
|
|
Richc
Member Since: 07 Sep 2009
Location: huddersfield
Posts: 133
|
Hi Carl
I had to have mine done by the dealer he hooked it up to his pc and did a suspension calibration which tells the car what the height measures now and recalibrates itself the does it again all ok.
|
14th Jul 2010 12:15 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Autologic type system or Faultmate will be able to do the calibration. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
14th Jul 2010 12:17 pm |
|
|
cj730
Member Since: 26 Feb 2009
Location: lancashire
Posts: 108
|
Thanks for your help
Carl Disco 3 TDV6 HSE Auto Bonatti Grey
Disco 3 TDV6 SE Auto Zambezi Silver
Disco 1 300 TDI Auto Willow Green
|
14th Jul 2010 12:36 pm |
|
|
cj730
Member Since: 26 Feb 2009
Location: lancashire
Posts: 108
|
Can i adjust the height's manually? If so what should they be and will i need 4 wheel aligment after?
Thanks
Carl Disco 3 TDV6 HSE Auto Bonatti Grey
Disco 3 TDV6 SE Auto Zambezi Silver
Disco 1 300 TDI Auto Willow Green
|
18th Jul 2010 2:33 pm |
|
|