Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Maintenance & Mods (D4)

Suspension warning light
Post Reply  Down to end
Page 3 of 3 <123
thepurser
 


Member Since: 07 Aug 2017
Location: Lindfield
Posts: 118

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Siberian SilverDiscovery 4

Update part two.
So conned my brother into starting the car so I could sit with my ear near the compressor.
It is running! Starts up about 2 or 3 seconds after the car starts.

No idea about the battery. i will check it tomorrow for you and post.
Have stuck the solar trickle charger on it as a precaution. May not do a lot but every little helps as they say. It does get direct sunlight until about 2pm.

Hesitant to ask but is there any issue with replacing the compressor with an AMK "style" compressor from the likes of Ebay? (jumping the gun a little but assuming from research and age of vehicle that it is the AMK compressor until I get a chance to confirm it).
I understand the prudent long term thing is to go oem but every £100 saved gets me a week close to my next potential employment.


Johnny V: Glad your issue has gone away! Hoping mine will be similar. What compressor did you get?
  
Post #22230937th Apr 2021 10:25 pm
View user's profile Send private message View poster's gallery Reply with quote
thepurser
 


Member Since: 07 Aug 2017
Location: Lindfield
Posts: 118

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Siberian SilverDiscovery 4

Cant remember exactly as ended up supervising some garden maintenance but was roughly 12.36v.
Checked the other family car and it was the same.
  
Post #22232558th Apr 2021 3:36 pm
View user's profile Send private message View poster's gallery Reply with quote
thepurser
 


Member Since: 07 Aug 2017
Location: Lindfield
Posts: 118

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Siberian SilverDiscovery 4

Hello again!

Sorry for the silence, waiting for ramps and some better weather, (and a quieter road to work on as I am opposite a school).
Got under, (or close to) the car today with mixed results.
I ordered a dryer refurb kit from fleabay and have spent some time watching videos on replacing filters, dryer medium and cleaning out the easy to access areas.
Thought I had a grasp of the process......
Undo three bolts.
Undo five clips.
Drop lower cover.
Undo two electrical connectors.
Disconnect pipes using the compression fittings.......Err, not enough pipes in all the wrong places and no sign of a push fitting anywhere.

Undo three bolts holding the compressor to the chassis.......... two lower bolts Tick and now for the third? The third? where the hell is the third?
Can feel a bolt head up the side of the bracket near the dryer and buried behind cables and hose but cannot get a socket to it or imagine how I would ever get it back in again if I got it out.

Had to admit defeat and put everything back together for now.


It is an AMK compressor.
Where there changes made to the pipework and bracket for the 2012 model? Mine is a MY12 (2011 plate) SDV6 Discovery 4.

Hard to see much under the car as I can only get it up about 18 inches due to the suspension being on the bumps at the moment.

Any further suggestions or hints welcomed but looking like it may be a garage trip at this point.

Sadly no photos. i left my phone indoors to avoid crushing it and by the time I decided to take photos i was caked in dirt.
  
Post #222655124th Apr 2021 3:51 pm
View user's profile Send private message View poster's gallery Reply with quote
thepurser
 


Member Since: 07 Aug 2017
Location: Lindfield
Posts: 118

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Siberian SilverDiscovery 4

Admitted defeat and the Disco is now sat at an independent mechanics just up the road.
Have to say the 2.5 mile drive up there, even at 30mph was not comfortable sat on the bump stops!!

Fingers crossed they find the fault and manage to get her back to magic carpet ride quality soon.
  
Post #222756230th Apr 2021 9:04 am
View user's profile Send private message View poster's gallery Reply with quote
thepurser
 


Member Since: 07 Aug 2017
Location: Lindfield
Posts: 118

United Kingdom 2012 Discovery 4 3.0 SDV6 HSE Auto Siberian SilverDiscovery 4

Final update.
Had the car back a week now and all seems to be going well.
Compressor is a bit noisier than the old one, (suspect not an oem) but it is holding its height when left alone, (I left it in extended mode for 4 days to see if it would drop and it didn't).

Thanks again to everyone for their input and assistance. Very much appreciated!!
  
Post #223016814th May 2021 7:01 pm
View user's profile Send private message View poster's gallery Reply with quote
Gary_P
 


Member Since: 03 May 2016
Location: Kent
Posts: 1505

Ukraine 2016 Discovery 4 3.0 SDV6 HSE Auto Corris GreyDiscovery 4

Thanks for the update. It's good for future reference to know what the solutions to the issues are.
Glad you got it sorted.
 Gary
-------------------------------------------

Discovery 4 HSE 2016MY 
 
Post #223017314th May 2021 8:16 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 3 of 3 <123
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site