Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Webasto Fuel Burning Heater

Thermocall TC4 - will it need enabling?
Post Reply  Down to end
Page 1 of 1
holm.dk
 


Member Since: 10 Mar 2013
Location: Esbjerg
Posts: 73

Denmark 2010 Discovery 4 3.0 TDV6 HSE Auto BournvilleDiscovery 4
Thermocall TC4 - will it need enabling?

Hi,

I would like to add a Thermocall TC4 to my FBH...
I already have the in-car 1533 oval timer and a wireless solution as well.
Was expecting to find a T91 module in the boot, but found the connector wrapped in foam...
My question is: as I can already control the FBH wirelessly, will it need any kind of enabling to have the TC4 working? Or can I just connect the module to the free connector in the boot?

Thanks a lot!
  
Post #18855491st Dec 2017 7:03 pm
View user's profile Send private message View poster's gallery Reply with quote
Bodsy
Site Sponsor 


Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

United Kingdom 2007 Discovery 3 TDV6 HSE Auto Java BlackDiscovery 3

Yes, needs enabling.
Not sure if the 1533 will work, once it’s enabled, you can use the on screen timed option (assum8ng you have the screen)
 Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling


Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here 
 
Post #18856752nd Dec 2017 12:42 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
holm.dk
 


Member Since: 10 Mar 2013
Location: Esbjerg
Posts: 73

Denmark 2010 Discovery 4 3.0 TDV6 HSE Auto BournvilleDiscovery 4

Thank a lot Thumbs Up

Don't have an LR dealer nearby - will a non-LR dealer be able to this with a diagnostic tool? Seems like a pretty straight forward job if you have to tool for it...
  
Post #18988898th Jan 2018 8:01 am
View user's profile Send private message View poster's gallery Reply with quote
johnn.cz
 


Member Since: 04 Jul 2010
Location: Pardubice
Posts: 8

Czech Republic 2006 Discovery 3 TDV6 HSE Auto Rimini RedDiscovery 3

Hi guys, I recently installed TC4 advanced into my D3. I already have perfectly working 1533 timer. The TC4 is connected directly to the loom of 1533 but the FBH is not reacting despite the fact the TC4 send back confirmation and the TC4 thinks the FBH is running... Using the 1533 connected via TC4 means FBH not reacting at all as well. Connecting the 1533 back to the original loom means the FBH starts immediatelly on the push of the button. Any ideas how to make the TC4 advanced working please? Thanks Jan
  
Post #225721215th Oct 2021 7:59 pm
View user's profile Send private message View poster's gallery Reply with quote
OllieZuerich
 


Member Since: 15 Dec 2023
Location: Tallinn
Posts: 3

Estonia 2007 Discovery 3 TDV6 HSE Auto Lugano TealDiscovery 3

Hi Jan, can you please PM me about installing the TC4 please? I am really looking guidance on how to do it. Thanks!
  
Post #235604015th Dec 2023 5:16 pm
View user's profile Send private message View poster's gallery Reply with quote
OllieZuerich
 


Member Since: 15 Dec 2023
Location: Tallinn
Posts: 3

Estonia 2007 Discovery 3 TDV6 HSE Auto Lugano TealDiscovery 3

johnn.cz wrote:
Hi guys, I recently installed TC4 advanced into my D3. I already have perfectly working 1533 timer. The TC4 is connected directly to the loom of 1533 but the FBH is not reacting despite the fact the TC4 send back confirmation and the TC4 thinks the FBH is running... Using the 1533 connected via TC4 means FBH not reacting at all as well. Connecting the 1533 back to the original loom means the FBH starts immediatelly on the push of the button. Any ideas how to make the TC4 advanced working please? Thanks Jan


Hi Jan, can you please PM me about installing the TC4 please? I am really looking guidance on how to do it. Thanks!
  
Post #235604115th Dec 2023 5:17 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site