chrisb25
Member Since: 11 Nov 2013
Location: Saffron Walden, Essex
Posts: 45
  
|
Hi guys,
Literally just bought my Disco 3 when this morning I got the 'Engine Fault' message come up on the dash. It had it's cambelt replaced along with a service on Tuesday. Without taking it into a dealer and having it scanned, is there anyway I can tell what's bringing this message up?
Cheers,
Chris
|
 14th Nov 2013 2:19 pm |
|
|
outofyorkshire
Member Since: 27 Apr 2009
Location: Emigrated to Notts
Posts: 1021
 
|
No way of knowing without a fault code reader...if it is still running OK drive it back to where you got it from 
could be anything from a simple EGR valve to something more serious Cheers Ian
___________________________________________
MY13 FL2 HSE lux - just gone
MY10 D4 XS
MY07 D3 SE
Massey Ferguson 400 FIS AGTV - Arctic Cat by any other name...
Citroen C3 Picasso for SWMBO so we can remember what fuel economy is!!
Member of the Narpy torch club
|
| 14th Nov 2013 2:30 pm |
|
|
nighthawk
Member Since: 24 Jul 2010
Location: Malta
Posts: 1163
 
|
Not really possible to tell. There are too MANY possibilities.
Sticking turbo, EGR, HPFP, MAF sensor, In tank fuel pump, fuel filter, turbo hose, cracked intercooler, blablabla.... loads of things can cause an ESF.
Fault codes can narrow it down drastically. Dennis
2006 Discovery 3 TDV6 Commercial Manual Buckingham Blue
|
| 14th Nov 2013 2:44 pm |
|
|
|
|
chrisb25
Member Since: 11 Nov 2013
Location: Saffron Walden, Essex
Posts: 45
|
I'm hopefully going to get it scanned monday by the garage I bought it from. I've got 3 months warranty, lets hope whatever wants to go wrong, does so in those 3 months 
|
| 15th Nov 2013 1:50 pm |
|
|
