Member Since: 22 Sep 2010
Location: Notts.
Posts: 8230
jobster wrote:
using cables is sooo 2001..... 8)
True but not everyone has an IPhone 5 and/or an Ipad3 It can when others can't,
It will when others won't,
It goes where others don't.
17th Feb 2014 9:24 pm
jobster
Member Since: 08 Jul 2012
Location: Hilversum
Posts: 591
True but not everyone has an IPhone 5 and/or an Ipad3
And that is soo 2012 .... (I'll get my coat now.......)RLD Sump Guard
GVIF & rear camera
New FBH via Dan
BAS Remap with IIDTool
17th Feb 2014 9:59 pm
PatGAPInnov Site Sponsor
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
Hi Guys
Quote:
I Like to know if in the future it will be possible for those who do not have the bluethooth iid tool unit connect trough cable and access the interface on the mobile phone or tablet without having to use the cruise control buttons.
This is not part of the plan, but updating the PC version will be done in time.
Member Since: 16 Feb 2013
Location: Ayrshire
Posts: 384
Hi
So question to the GAP guys....... if 2.19 is now 3.0 (thanks Robbie) is it still projected to be a Feb release or do you think we might need to be a bit more patient ?
Thanks
17th Feb 2014 10:13 pm
PatGAPInnov Site Sponsor
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
The beta phase was schedule to start in the beginning of February and was delayed 2 weeks. Therefore, if everything goes according to plan, we should release to the general public in mid March.http://www.gap-diagnostic.com/
17th Feb 2014 10:23 pm
Kummu24
Member Since: 16 Feb 2013
Location: Ayrshire
Posts: 384
Thanks - appreciate the update
17th Feb 2014 10:37 pm
nighthawk
Member Since: 24 Jul 2010
Location: Malta
Posts: 1163
Very interested in a PC version similar to the bluetooth app, via cable because:
1. There is no Windows Phone version.
2. I will never own a product with a bitten fruit printed on it (just my opinion, don't start wars on this!)
3. Android is OK but I'm still a heavy Windows 8.1, Windows Phone and Microsoft Surface RT user and fan (and all the seamless synching that combination gives), apart from being a Windows developer by trade, and it doesn't make sense to buy an android tablet just for the IID Tool
4. I have a Car PC in the D3 (although still running windows XP) which I could hook it up to
5. Worst case (eg. if Windows XP is not supported), I could drag my laptop down to the car when I need to use the interface.Dennis
2006 Discovery 3 TDV6 Commercial Manual Buckingham Blue
18th Feb 2014 7:48 am
Sloppy
Member Since: 17 Jul 2013
Location: North Yorkshire
Posts: 142
PatGAPInnov wrote:
Hi Joe
The current PC software is only a replica of the integrated interface (4 buttons and a screen display), it does not allow viewing live values in a graph scale like on an iPad for example. It is only used as a backup solution in specific cases.
The PC software is available for download on our website. The IIDTool itself needs to be at V2.18 or above.
Cheers
Thanks for this and apologies for all the questions,
you mention the IIDTOOL needs to be version 2.18, if a new software comes out for it in say march can i update this tool (assuming i bought a tool now) to the latest software or would i have to buy another tool?
I was under the impression there were updates for the older tools to bring them in line with the latest developments, which was a big attraction of the tool over any other.
18th Feb 2014 5:31 pm
PatGAPInnov Site Sponsor
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
Hi Guys
Nighthawk: i'm sure you are not the only one interested in it and this is why it is in the pipeline.
Sloppy: No need to apologize, it is our pleasure to answer all questions.
Quote:
you mention the IIDTOOL needs to be version 2.18, if a new software comes out for it in say march can i update this tool (assuming i bought a tool now) to the latest software or would i have to buy another tool?
All IIDTools can be updated via the USB connection and the updater software (both Mac and PC), no need to replace the tool. The hardware cannot be updated and this is why we offer to exchange a non Bluetooth IIDTool for an IIDTool BT.
Member Since: 07 Nov 2010
Location: lisboa
Posts: 92
hi
but how can you make this change?
18th Feb 2014 6:09 pm
jobster
Member Since: 08 Jul 2012
Location: Hilversum
Posts: 591
Nunocosta,
I gather that you having an IIDTool you have registered it @Gap-Diagnostics. So go to:
http://www.gap-diagnostic.com/login.html. There is a "I forgot my password" option just in case. Once you're in, go to my products and you'll see your tool there. There's an option "downloads", and choose either the uodater for windows or Mac.
Everyhting else needs no explanation once you have downloaded, installed and opened the updater. I can do this, assume my wife can too, so for a D3 driver, having had to deal with complicated stuff (even if everything works well) peace of cake.RLD Sump Guard
GVIF & rear camera
New FBH via Dan
BAS Remap with IIDTool
18th Feb 2014 9:55 pm
nunocosta
Member Since: 07 Nov 2010
Location: lisboa
Posts: 92
Hi jobster,
My question is about change iid tooll to iid tool bluethooth and PatGAPinnov already send me a pm with reply.
Thanks anyway
18th Feb 2014 10:06 pm
jobster
Member Since: 08 Jul 2012
Location: Hilversum
Posts: 591
Fair enough, you never know if someone just misses the obvious stuff. If you've got a mail from GAP, I guess you're gonna be ok on that part too. Nice and helpful bunch of people there!RLD Sump Guard
GVIF & rear camera
New FBH via Dan
BAS Remap with IIDTool
Last edited by jobster on 19th Feb 2014 7:00 pm. Edited 1 time in total
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
