Member Since: 06 May 2005
Location: Shed
Posts: 821
Removing Headlight from the wiring loom
The reply to this post will be the "Tip" ...
Had to replace a sidelight bulb. Managed to do it without detatching the light unit from the wire loom, but try as I may I couldn't part the two..
There must be a knack to it ??
Cheers..............Somewhere in-between my old D3 and what's to come next .........
2nd Apr 2007 6:45 pm
lee01277
Member Since: 06 May 2005
Location: Shed
Posts: 821
Is it that simple then ?..............Somewhere in-between my old D3 and what's to come next .........
3rd Apr 2007 7:47 pm
christyler
Member Since: 31 Dec 2005
Location: Cork, Ireland
Posts: 1168
there is just a little clip on the connector, you do have to squeeze it hard, and pullCLUB "Ah Shor it'll be grand"
First D3 in the World with a Hydraulic Winch.
2006 Disco 3 TDV6 S Auto,
Diff Locks, Turbochipped, Raised Air Intake, 220volts Onboard, Onboard Compressor, Large Bore Exahust, Underbody Protection, One or two Other Mods as well.
Other toys include, Argo Avenger 8x8, Tatra 6x6 Motorhome (Being Built)
3rd Apr 2007 7:49 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50978
ISTR theres a tiny push clip midway that needs to be depressed ...then it should just pull apart 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
3rd Apr 2007 7:50 pm
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
Yep - its only as tricky as those kiddie proof tablet containers... Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
| 08MY Discovery 3 (history) 
