Member Since: 27 Nov 2012
Location: Southampton
Posts: 2649
LED & Osram lighting upgrades
We have been adding to our range of LED upgrades and have just got a new selection into stock, because of lots of pre-orders I would also expect to run out of some references quickly with no more until the new year.
Osram Nightbreakers for your headlamps.
Osram DRL Kits to replace your foglamps.
A selection of interior light SMD or LED panels (they are all pretty bright, no softer options yet).
A front sidelamp with 50/50 SMDs - CANBUS compliant (again very white, more so than the headlamp)
Reverse lamps - 120 SMDs - Very bright!
Stop & Tail lamps for the D3 light unit - Twin filament 50/50 SMDs in RED
Rear Indicators - 127 SMD's in Amber - These will need resistors to stop your dash indicator running at double speed, we have some of those as well.
If you have suggestions of anything else to add to stock and particular colours (Kelvin rating) please suggest them. If there is a demand I will add them to the next order now I have found a decent supplier amongst so many others
The law -
Osram kit - all 100% street legal, upgrades are achieved without increasing wattage or indeed the strain on your wiring.
Osram LED Fogs are E-Marked so no issue with those.
Interior lights - No issue
Sidelamps - As long as they meet MOT regulations you will not have any issues with the present requirements. Must not flicker, must be white, that's about it.
We do have (because I was asked to stock them) HID conversions from H4 & H7 but these are not a street legal option so you fit these at your own risk.Paul Redding
+44 (0)23 8052 2774
Order Parts Online at www.advancedfactors.co.uk
10th Dec 2013 12:12 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20840
Member Since: 17 Feb 2012
Location: Chelmsford
Posts: 212
Hi Steve, am looking at the stop/tail 380 LED, but dosent state if CAN BUS compliant, so assume you need resistors, but nothing stated ?
would be good if you did the 501 SMD bulbs, in white and red Graham
Always interested in learning,,
everyday is a school day, even at my age
10th Dec 2013 1:18 pm
Advanced Factors Site Sponsor
Member Since: 27 Nov 2012
Location: Southampton
Posts: 2649
I await correction but don't think there are any issues with the stop/tail light. I will dig out one of my old light units later and test them.
501 SMD in red and white for interior lights?Paul Redding
+44 (0)23 8052 2774
Order Parts Online at www.advancedfactors.co.uk
10th Dec 2013 1:20 pm
Woolmeister
Member Since: 26 Mar 2007
Location: Chandler's Ford
Posts: 3464
Graham,
I've had 380s (from HIDS4U, mind) in my tail/brake lights for months now with no issues. No resistors required on those; only on the indicators.
Steve2021 BMW iX3 Premier Edition in Carbon Black ⚡️🔌
2019 Škoda Kodiaq 2.0 Tdi 190 DSG Sportline in Quartz Grey. Excellent vehicle. Gone.
2017 Discovery Sport HSE Auto in Carpathian Grey and Ebony Leather. Modern JLR Junk. Gone.
2007 Discovery 3 TDV6 S Manual in Zermatt Silver with Ebony Cloth (143k) Gone, but now patrolling the Asia section of the West Midlands Safari Park!
10th Dec 2013 1:26 pm
Gwiz
Member Since: 17 Feb 2012
Location: Chelmsford
Posts: 212
Yes sorry interior lights and front side lights, unfortunatly i have just bought some from HID4U myself.
ok woolmeister if thats the case may get a set for mine.
Graham
Always interested in learning,,
everyday is a school day, even at my age
10th Dec 2013 1:30 pm
fmb123
Member Since: 04 Jan 2011
Location: Hampshire
Posts: 125
i have standard headlights - which bulbs do i use for low and high beam.
seem to find a number of answers.
Low beam H7
High beam H1 or H7?Current -
2018 Discovery 5 Commercial
1988 3.5 Range Rover Classic
1993 4.6 Range Rover Classic LSE
2006 Audi RS4 Avant
Gone - 2007 Discovery 3
10th Dec 2013 1:48 pm
Advanced Factors Site Sponsor
Member Since: 27 Nov 2012
Location: Southampton
Posts: 2649
1 pair of H7s for each side in the Halogen unitsPaul Redding
+44 (0)23 8052 2774
Order Parts Online at www.advancedfactors.co.uk
10th Dec 2013 1:50 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73078
Plus worth upgrading the highbeams (H7) as well.
10th Dec 2013 1:51 pm
wizbongre
Member Since: 26 Oct 2013
Location: Liverpool
Posts: 695
Disco_Mikey wrote:
Stop spending all my money!
I'm just sat here thinking exactly the same thing... We bought the Disco 3 for my wife to use as a daily driver and instead I'm spending most of my time in it and looking for stuff to change/upgrade
10th Dec 2013 3:07 pm
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
steve,
I need to change my headlight bulbs on my MY12 XS. the oem ones are useless. Ive changed them for the brighter H7 bulbs but they keep blowing - I must have gone though 10 dipped headlight bulbs in 12 months. Dealer cant find any issues , so can I upgrade to LED?? or something that's not going to keep blowing - I should have paid the extra and taken the magic light option when I bought the car Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
13th Jan 2014 9:59 am
chalky
Member Since: 21 Aug 2008
Location: Yorkshire
Posts: 3145
I'm interested in the Osram LED DRL's ? Are they direct replacement and as OE wiring ?Only dead fish go with the Flow !
13th Jan 2014 10:31 am
chalky
Member Since: 21 Aug 2008
Location: Yorkshire
Posts: 3145
Just read the blurb I like the idea of them acting as cornering lights when indicating, I read that they will fit but the aperture needs letting out by about 5mm !
And it says unskilled which again suits my requirements
All I need to do now is give it a day or 3 to acclimatise to the price and I'll most likely jump on a pair if these as my Mrs car activates the fogs when she pulls on the drive and it's quite a nice featureOnly dead fish go with the Flow !
13th Jan 2014 10:39 am
Advanced Factors Site Sponsor
Member Since: 27 Nov 2012
Location: Southampton
Posts: 2649
DiscoDunc wrote:
steve,
I need to change my headlight bulbs on my MY12 XS. the oem ones are useless. Ive changed them for the brighter H7 bulbs but they keep blowing - I must have gone though 10 dipped headlight bulbs in 12 months. Dealer cant find any issues , so can I upgrade to LED?? or something that's not going to keep blowing - I should have paid the extra and taken the magic light option when I bought the car
Hi Duncan
Increased wattage upgrade bulbs tend not to last as long, I have heard no issues with the Osrams though so may be worth a go, is your CCF set for the correct light type?
LED headlamps - Big no - they don't focus so it will be like having someone walk in front with a candle!Paul Redding
+44 (0)23 8052 2774
Order Parts Online at www.advancedfactors.co.uk
13th Jan 2014 10:46 am
Advanced Factors Site Sponsor
Member Since: 27 Nov 2012
Location: Southampton
Posts: 2649
chalky wrote:
I'm interested in the Osram LED DRL's ? Are they direct replacement and as OE wiring ?
Yes all plugs into the existing fog connectors then you just need to splice into indicators and light circuits with the mini loom suppliedPaul Redding
+44 (0)23 8052 2774
Order Parts Online at www.advancedfactors.co.uk
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
