Member Since: 02 May 2006
Location: andover
Posts: 16
multi height towbar recall
just had the D3 back from dealer to sort out leaking sunroof ( FOC replacement of blocked drain tube even though out of warranty - Ottons of Salisbury )
But as part of the check over they replaced the plate on the multi height towbar as a recall, however now the Maxxraxx bike rack bracket that they took off doesn't fit as the bolts are too short.... anyone else had this happen? Reason being, the OEM bolts don't appear to be standard, shouldered washer etc. I can get std 8.8 HT bolts but would have to use Std washers.. just wondering if anyone has found longer versions of the originals??
thanks in advance
13th Jun 2008 3:21 pm
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10352
whats wrong with towbar bolts available in various lengths form most caravan shops?
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
The hex flange bolts and nuts can be replaced by the same grade standard bolts with washers. Hex flanges just cut down the chance of the washers being left out. and are no doubt cheaper.
There will be a few letter on the bolt head such as AAF or BUL these refer to the manufacture the 8.8 or 10.9 is the grade as you know.
If you let me know what length you are looking for I will get some one to have a look whats on site, however we process in the region of 2000 tons of bolts per week so unless we have a part number it's a bit like a needle in a haystack
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
13th Jun 2008 10:53 pm
taffy1961
Member Since: 02 May 2006
Location: andover
Posts: 16
thanks for the replies, i can get the 8.8 grade through RS, but i will check out local caravan / trailer centres as well, good tip
Buying bolts through RS - that an expensive way to go
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
16th Jun 2008 12:51 pm
DiscoStu
Member Since: 09 Apr 2006
Location: London
Posts: 11412
Member Since: 21 Jan 2007
Location: Yorkshire
Posts: 2049
When i got my maxxraxx they fitted it and used normal towbar bolts no problems at the moment.
16th Jun 2008 7:55 pm
Pelyma
Member Since: 06 Jan 2005
Location: Patching, Sussex
Posts: 15496
Mine too, although I don't use the drop plateDS3 TDV6 HSE - Silver with Alpaca (old one) Gone
DS3 TDV6 HSE- Silver with Alpaca (new one) Gone
D4 HSE Lux - Montalcino Red Gone
Porsche Cayenne V8 Diesel S
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)
