- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
Baggy
Member Since: 11 Feb 2006
Location: sydney.....in the land of oz
Posts: 183
  
|
| Cost to replace brake pads |
|
Just had the 24k (km) service done - was advised the pads would need replacement in around 7k. Checked the other posts, and 30k looks pretty good for a set of pads (someone quoted 12-18k miles).
However, the quote to replace them by the dealer was $800 - seems a bit on the high side.
Appreciate any feedback on anyone elses experience regarding cost and pad life.
Cheers. '11 TDV6 - Stornoway Grey.... still lovin' it!!
REDUCE GREENHOUSE GASSES.......Eat more BEEF!!
Addendum: Red wine goes REALLY well with BEEF
|
 7th May 2007 11:31 am |
|
|
90BHP
Member Since: 18 Oct 2006
Location: Half way along the road on the right
Posts: 3706
 
|
flip, just had 15,000 mile service @ 16,000 miles (oops) and was advised pads 20% worn all round. So I'm doing alright.
$800 + about £400 at the Moment - and for pads that sounds chuffin expensive. "To finish first, one first has to finish ...."
|
| 7th May 2007 11:34 am |
|
|
PCH
Member Since: 12 Jan 2005
Location: Anywhere but work
Posts: 812
|
Baggy,
Mine just had the fronts done at 46,000 kms. Front Pads ($135), disc machining ($36) and labour ($102) around $273 + GST = $300 all up. So even if you need rears then doubling this cost would only be $600.
Chris 2011 Discovery 4 (MY12) SDV6 HSE with General Grabber AT's, Traxide Aux Battery system, custom rear drawers and Autosafe half height cargo barrier
Gone - 2005 Discovery 3 TDV6 HSE
ARB Bull Bar, Warn 9.5XP Winch, IPF D/Lights, Cooper STT's, LR Raised Air Intake, Traxide aux battery system, custom drawers and half height Autosafe cargo barrier, Mitchell Bros 4x4 tow hitch
|
| 7th May 2007 1:06 pm |
|
|
catweasel
Member Since: 05 May 2006
Location: Bundaleer
Posts: 4805
|
how neccesary was the machining or is that something you like to do.
|
| 7th May 2007 1:21 pm |
|
|
Baggy
Member Since: 11 Feb 2006
Location: sydney.....in the land of oz
Posts: 183
|
Thanks Chris.
I'm wondering the same as CW......why have the disks machined? was your work done by a dealer or 3-rd party?
Vic. '11 TDV6 - Stornoway Grey.... still lovin' it!!
REDUCE GREENHOUSE GASSES.......Eat more BEEF!!
Addendum: Red wine goes REALLY well with BEEF
|
| 8th May 2007 12:34 am |
|
|
PCH
Member Since: 12 Jan 2005
Location: Anywhere but work
Posts: 812
|
Hi guys,
The machining was recommended by the dealer and yes it was by authorised dealer.
Chris 2011 Discovery 4 (MY12) SDV6 HSE with General Grabber AT's, Traxide Aux Battery system, custom rear drawers and Autosafe half height cargo barrier
Gone - 2005 Discovery 3 TDV6 HSE
ARB Bull Bar, Warn 9.5XP Winch, IPF D/Lights, Cooper STT's, LR Raised Air Intake, Traxide aux battery system, custom drawers and half height Autosafe cargo barrier, Mitchell Bros 4x4 tow hitch
|
| 8th May 2007 2:26 am |
|
|
Jamo
Member Since: 18 Jan 2006
Location: Esperance, Western Australia
Posts: 1170
|
I had my fronts done at 82000km and they machined the disks too. Have a nice day!
2010 Cayenne Diesel with PASM & Off Road Pkg
2005 HSE D3 (Sold)
|
| 8th May 2007 5:36 am |
|
|
Baggy
Member Since: 11 Feb 2006
Location: sydney.....in the land of oz
Posts: 183
|
Jamo........your front pads lasted 82,000??? '11 TDV6 - Stornoway Grey.... still lovin' it!!
REDUCE GREENHOUSE GASSES.......Eat more BEEF!!
Addendum: Red wine goes REALLY well with BEEF
|
| 8th May 2007 7:20 am |
|
|
jonesy63
Member Since: 17 Oct 2006
Location: Didn't we have a lovely time, the day we went to ...
Posts: 848
|
Lots of highway miles?
Machining discs is one of those necessary evils - you need it done to remove run-out, but it sure does limit the longevity of the discs!
Cheers,
Rob
|
| 8th May 2007 9:08 am |
|
|
Jamo
Member Since: 18 Jan 2006
Location: Esperance, Western Australia
Posts: 1170
|
Baggy wrote:Jamo........your front pads lasted 82,000???
I can't remember...I've got a head like a sieve, so I'll have to go back though my service invoices and check. There's a possibility they were replaced around the 45000 mark. But iF they have been replaced before, it was only the once. Have a nice day!
2010 Cayenne Diesel with PASM & Off Road Pkg
2005 HSE D3 (Sold)
|
| 8th May 2007 11:29 am |
|
|
Baggy
Member Since: 11 Feb 2006
Location: sydney.....in the land of oz
Posts: 183
|
Hi guys,
Appreciate the feedback - thanks.
I'll definetly have to negoitate the fee!!
Cheers, Vic. '11 TDV6 - Stornoway Grey.... still lovin' it!!
REDUCE GREENHOUSE GASSES.......Eat more BEEF!!
Addendum: Red wine goes REALLY well with BEEF
|
| 8th May 2007 9:23 pm |
|
|
bashir
Member Since: 04 Jan 2005
Location: Huon Valley, Tasmania
Posts: 154
|
Hey Vic,
had my brake pads replaced after about 18mnths ... around the 34000km mark ...
Initially i was quoted over $800 by the LR dealer. After I told them that the price was ridiculous, they dropped it down to just over $600. I'm not sure if the discs were machined, have to look into my service records for that.
cheers,
Bashir. 2009 Discovery 4 3.0 TDV6 HSE
1985 LR 110 County 3.5 V8
(what options?!)
|
| 9th May 2007 1:21 am |
|
|
Baggy
Member Since: 11 Feb 2006
Location: sydney.....in the land of oz
Posts: 183
|
Hi Bashir......thanks mate, you've given me a target to aim for when its time to go in and 'negotiate' 
Vic '11 TDV6 - Stornoway Grey.... still lovin' it!!
REDUCE GREENHOUSE GASSES.......Eat more BEEF!!
Addendum: Red wine goes REALLY well with BEEF
|
| 9th May 2007 5:14 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
