Before doing it for the first time rtm, I think you will find that Land Rover are fairly helpful - there is even a spare wheel provided."To finish first, one first has to finish ...."
15th May 2007 7:41 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73080
I've already gone through 2 x standard jacks, now use an air jack with a compressor for wheel changes (roads to muds) & standard one is for emergency use only. Also the wheel wrench is total cr*p, broken 2 as well!
15th May 2007 7:46 pm
JKO
Member Since: 25 Jan 2006
Location: High Peak
Posts: 17
Nick
Had a nail stuck in one of my rear tyres and local ATS/Euromaster were not keen to use their jack in case they damaged the suspension.
Rather than get LRA out I got them on the phone and they were really helpful. They talked the garage through the proceedure and use of cars own jack.
Essentially, we were told to lock the suspension in access height and then use the cars own jack. It seemed to work fine much to the obvious relief of the mechanic who I think was worried about a potential big claim for damaged suspension should anything have gone wrong.
Hope this helps.
John
15th May 2007 8:37 pm
PeanutBob
Member Since: 24 Oct 2006
Location: Cheshire
Posts: 669
Over the past year I have had 5 tyres replaced due to wear and punctures. Both at ATS and Tyrecraft here in Liverpool the fitters were entirely diligent in consulting their manuals, and both companies told me to raise the suspension to off road setting and have the hazard warning lights on. I was quite suprised how insistent they were in doing this, and also how consistent they also were in their policy every time I had to replace the tyres.
15th May 2007 9:18 pm
bkehoe
Member Since: 24 Feb 2006
Location: Wexford
Posts: 1481
You guys really don't want to know how I saw a D3 jacked up in a tyre place over here IE - 05 D3 TDV6 HSE - Zambezi Silver
SA - 07 VW Golf TDI - White - Sold!
I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
15th May 2007 10:13 pm
AndrewS Tarquin of the Desert
Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10441
DSL wrote:
Look Out D3 Carrying Tyres Explodes In the Beginning there was nothing, which exploded.
15th May 2007 10:16 pm
n1cktdv6
Member Since: 20 Mar 2007
Location: Warrington
Posts: 1161
This is all very good info but how the b y hell do I swap the wheels.....access height locked, trolly jack and axle stand is what I guessed but........D4 HSE....Probably, but not quite decided yet.
3.6 TDV8 Vogue
XC90 SE Lux
A8 Quattro TDi
D3 SE
15th May 2007 10:28 pm
Smarticus
Member Since: 01 Jan 2005
Location: Northumberland
Posts: 655
Like the look of the air bag lift system - which one is it, where from and how much ?
But the position of the axle stand in the photo ....? Is that the right place (ie - nowhere near the axle )Disco 4 TDV6HSE
Defender 200TDi CSW
RR Evoque
15th May 2007 10:32 pm
jkp
Member Since: 16 Sep 2005
Location: Living among Bawbags
Posts: 4528
Changed mine a few times.
Offroad height as per the manual, hi lift trolly jack (got one from machine mart, 3t and lifts to 540mm I think £40'ish) and an axle stand to pop under the chassis rail just in case the jack starts to lower
15th May 2007 10:34 pm
jkp
Member Since: 16 Sep 2005
Location: Living among Bawbags
Posts: 4528
Smarticus wrote:
Like the look of the air bag lift system - which one is it, where from and how much ?
But the position of the axle stand in the photo ....? Is that the right place (ie - nowhere near the axle )
Stand look to be under the chassis rail. That's where i put mine just in case the jack starts to lower of its own accord.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
y hell do I swap the wheels.....access height locked, trolly jack and axle stand is what I guessed but........
