GUM97
Member Since: 25 Feb 2013
Location: North West
Posts: 77
|
PowerMagic settings help? |
|
Hi all,
I've got a BlackVue wired up to a PowerMagic in the MY15 D4. It was installed by an auto electrician upon delivery, but it's not working quite as well as on the previous D4 (well, not as I'd like it to be!).
After turning the engine off, the camera goes into parking mode. Ideally, I'd like it to stay in that mode for about 2 hours and then shut off (as per last disco). But instead, it stays in parking mode for about 12 hours or so. This then results in the battery voltage dropping below the threshold for the Stop/Start to be working.
So, does anyone know how to adjust the settings on the PowerMagic to make this possible?
Thanks in advance.
Pete
|
12th Jan 2015 9:33 pm |
|
|
Wee Gaz
Member Since: 01 Dec 2013
Location: Coatbridge
Posts: 173
|
Its the dip switches on the power magic box you need to adjust
Google power majic and you will get the instuctions on how to change the settings hope this helps
|
12th Jan 2015 10:00 pm |
|
|
JonM
Member Since: 24 May 2012
Location: North Yorkshire
Posts: 1247
|
You can set the timer with the little switches on the power magic. Switches 3&4 off and 5 on should give 2 hours. MY2022 D5 HSE D300 - with extra nice bits added
MY2019 D5 HSE 3.0 SDV6 - sold to a dealer for a crazy price! - So good I bought another!
MY2012 D4 HSE 3.0 SDV6 - retired to a new home
|
12th Jan 2015 10:05 pm |
|
|
Popelka
Member Since: 31 May 2008
Location: Praha (Prague)
Posts: 2430
|
doesn't the motion detection change anything with power usage ?? Experience is a difficult teacher, because she gives the test first and then the lesson afterwards!!!!
|
13th Jan 2015 9:38 pm |
|
|