Member Since: 29 Nov 2014
Location: Staffordshire
Posts: 36
Cambelts and oil pump
Hi thinking of doing my Cambelts in the next week or 2 can anyone recommend the best kits to buy and also should I replace the oil pump at the same time or with it being an 05 plate will it be ok? Rather be safe than sorry but no point changing of they don't give trouble on the early ones?
It's done 140000 now Cambelts should of been done at 107000 according to its history but I always like do them myself so I no they are done
Steve
24th Jan 2015 5:26 pm
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
Replaced mine last year and used a kit from site sponsor Advanced Factors, you'll also need a timing kit that includes the flywheel locking tool if you intend to replace the oil pump. Some of the aftermarket timing kits require some fettling to allow the locking tool to fit the bellhousing.
http://www.advancedfactors.co.uk/1-click-h...-156-c.aspGAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
Last edited by Allan_T on 24th Jan 2015 7:01 pm. Edited 1 time in total
24th Jan 2015 5:40 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Got my parts from island 4x4, drill bits are just fine to lock the cam pulleys.
24th Jan 2015 6:37 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20844
At 140k miles, your pump will likely be worn... If your oil.pressure light stays lit for more than around 3 seconds, consider replacing it
I done my own pump at around 60k miles, and the pressure light goes out in around 2 seconds, even in the middle of winterMy D3 Build Thread
Member Since: 29 Nov 2014
Location: Staffordshire
Posts: 36
Thanks for the advise Disco mikey I will see how long it takes go off in the morning.
Also I was asking if there is a make of belt kit people recommend I usually use continental kits but is it best to go genuine for the belt kit? I'm not bothered about price as I've seen some cheap kits out there but wouldn't use them
Steve
24th Jan 2015 7:45 pm
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
The kit from island 4x4 was dayco incl the idler pulleys.
The oil pump was oe land rover and circa 70 quid plus vat.
Basically I fitted everything new and nowts fell off yet!
24th Jan 2015 7:55 pm
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
GAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
24th Jan 2015 8:16 pm
woody32 Site Sponsor
Member Since: 11 Mar 2009
Location: Somerset
Posts: 3551
I used advanced factors timing kit today and it was perfect I found the belt holding tool useful,not something I've used before so thought I'd give it a try and as Allan pointed out some kits need filing down to fit,but AFs kit was a perfect fit inc the F/W locking tool Wanted D4s non runners pm for competitive price.
IID Pro MV License - D3/4 RRS - Enabling, Updates,Transmission flushing.
Mobile or workshop,PM for details.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
and as Allan pointed out some kits need filing down to fit,but AFs kit was a perfect fit inc the F/W locking tool 
