Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > In Car Electronics (D3)

Power fold mirror switch intermittent issue
Post Reply  Down to end
Page 1 of 1
skunk38
 


Member Since: 05 Jan 2024
Location: South Wales
Posts: 118

Wales 2007 Discovery 3 TDV6 HSE Auto Stornoway GreyDiscovery 3
Power fold mirror switch intermittent issue

I've trailled through as many power fold mirror posts as I can find, but couldn't see a similar issue.

My power fold mirror switch works most of the time when operated, usually when parked up or driving through narrow lanes, but sometimes won't operate at all. When I stop and the switch doesn't work, if I open the door and operate the switch the mirrors will then fold - obviously I can't do this when driving - so I'm wondering is it a known issue that the wiring through the door rubber tube could play up? The car is on 142000 miles, so I guess average for an '08 plate.
I was tempted to buy a switch to try, but got other mechanical D3 priorities 1st.
 Volunteer driver with 4x4 Response South East Wales
Volunteer Rider for Blood Bikes Wales

Land Rovers owned -
Disco 1 - 300 Tdi - dead
Disco 1 - 200 series - 3.5 V8 on LPG - dead
Disco 2 - TD5 - sold
Disco 1 - 300 series - 3.9 V8 on LPG - sold
Disco 3 - TDV6 HSE - current 
 
Post #237816225th Sep 2024 2:18 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site