Member Since: 12 Sep 2015
Location: Surrey
Posts: 14
EPB not working-wiring
Just brought a cheapish 07 plate with a few issues, one being the EPB not working- think I know why
The question is- can you buy this rear loom separately ?
11th Apr 2016 1:18 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20808
No. Only comes as part of the chassis loom
However, MMJ are selling replacement connectors on eBay for £20
Be aware, they are different between manual and auto models My D3 Build Thread
Member Since: 12 Sep 2015
Location: Surrey
Posts: 14
Thank you for the quick reply, had to cut back about 4 inches of the loom to get to undamaged wiring. Do you know what may have caused this burnt loom- could it be caused by a seized or over wound EPB motor?
11th Apr 2016 5:45 pm
Far2easy
Member Since: 12 Sep 2015
Location: Surrey
Posts: 14
Ordered a plug off Monster Metal- thanks for the heads up
Now I need help on the wiring of the plug, the old wiring was badly damaged as in the pics, I can splice most of the wires but there are 3 identical red ones and 2 black- not sure which goes where- any pointers appreciated
13th Apr 2016 10:09 pm
Far2easy
Member Since: 12 Sep 2015
Location: Surrey
Posts: 14
Bumpty bump
15th Apr 2016 8:37 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20808
Member Since: 12 Sep 2015
Location: Surrey
Posts: 14
That's my issue, can't find a wiring diagram, are they still in the Haynes manual?
More than happy to pay for one, just need help as where to find one
15th Apr 2016 4:59 pm
Sydney
Member Since: 11 Aug 2013
Location: St Neots
Posts: 903
Can't see a wiring diagram in the Haynes for the EPB.De-Tango
V8 Brakes
EGRs blanked
Running boards
3 flash indicators and clock on dash
Blingy grille...
15th Apr 2016 5:06 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20808
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
