Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73078
IID Useful Screens
Just wondering what other peeps have set up for IID BT screens.
Got these 2 set up.
General running screen for additional temp info. If I'm doing a longhaul I tend to just leave it in background on the iDog&Bone, just flick to it when I remember
Click image to enlarge
Second one injector offset numbers
Click image to enlarge
Any other suggestions?
6th Aug 2016 1:33 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8223
Engine speed can be changed in the second screen as it is already displayed in the top right corner It can when others can't,
It will when others won't,
It goes where others don't.
6th Aug 2016 3:20 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73078
True, forget that was a change in the last update. Just got to think of a useful alternative.
6th Aug 2016 3:52 pm
robpenrose
Member Since: 12 Jan 2016
Location: Surrey / SW London
Posts: 2138
Is it ok to have it running all the time then, and the IID tool connected for as long as you want?
Current: D4 HSE
Previous: BMW Z4M Coupe
Previous: Land Rover Defender 90 CSW Td5
Previous: Land Rover Discovery Td5 ES
6th Aug 2016 4:20 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73078
Some peeps do, I don't.
6th Aug 2016 4:25 pm
rogc
Member Since: 02 Sep 2015
Location: Kent
Posts: 64
Thats strange. I have this installed on an android phone, firstly i cannot see speed and voltage at the top of the screen when displaying live values, and secondly when i come to save the favorite items it doesnt list any live values to select. Any ideas?
Forgot to say, updated to latest firmware, the voltage and speed is selectable from one of the front screens under IID config, which is selected yes.
6th Aug 2016 4:44 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8223
robpenrose wrote:
Is it ok to have it running all the time then, and the IID tool connected for as long as you want?
GAP do not recommend it, in fact they advise against, quote "the Iid tool is not designed to connected permanently".It can when others can't,
It will when others won't,
It goes where others don't.
6th Aug 2016 8:10 pm
Madrilleno
Member Since: 13 Oct 2014
Location: Nottingham
Posts: 1783
Wonder why they say that?There are two rules for success,
1. Never tell everything you know.
D4 gone!
D5
7th Aug 2016 6:16 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Aside from fault-finding test drives I do not consider it wise to have a bidirectional diagnostic tool connected whilst driving. A number of systems on the CANBUS are safety critical and their integrity level is compromised when a diagnostic tool is on the network.
Land Rover - Turning Drivers into Mechanics Since 1948
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
