max.payne
Member Since: 01 Jun 2015
Location: lincolnshire
Posts: 31
  
|
Hi all tried to search on here but can't find it my fbh on my d3 doesn't seem to work at all is there any way I can reset it or test it do I need a scanner or is there common problems I can check ?? Any help would be appreciated People say I'm addicted to brake fluid? I'm not I can stop at any time!
|
 15th Nov 2016 9:13 am |
|
|
|
|
Discogaz
Member Since: 17 Mar 2014
Location: Bracknell
Posts: 1399
|
As I understand it, the FBH is set up to not operate on less than a quarter tank of fuel so if you've run the tank down, then it won't start. Once it makes 3 attempts to start, then I think it needs a re-set.
I've done this with a few members local to me with my Nanocom and it was always a low tank of fuel; causing the problem on each occasion. Of course, there could be other issues but try brimming the tank and maybe a hard re-set will be enough to get it to fire up.
|
| 15th Nov 2016 9:23 am |
|
|
max.payne
Member Since: 01 Jun 2015
Location: lincolnshire
Posts: 31
|
Cheers boys will give it a go  People say I'm addicted to brake fluid? I'm not I can stop at any time!
|
| 16th Nov 2016 8:33 am |
|
|
