Aga
Member Since: 06 Oct 2024
Location: Naas
Posts: 2
|
Hi All.
I tested the key fob it's sending the signal at correct frequency with each press of any of the buttons.
The issue is that when I switch off the engine and take the key out I press a button and it will work, but if I press again and again and keep pressing nothing is happening with the car like the signal is not received. When I put the key back in the socked and start the engine then switch is off take out the key it will work again but ONCE only, so only 1 press of a button. Anyone else had similar problem?
|
 6th Oct 2024 5:05 pm |
|
|
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23823
  
|
If you have a spare key, have you tried it?
I think I’d replace the key fob battery first and see if that makes any difference. 2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
|
| 6th Oct 2024 6:44 pm |
|
|
Aga
Member Since: 06 Oct 2024
Location: Naas
Posts: 2
|
Thank you but the key is working all the time, I purchased a tester and it is sending the signal with every press of a button. Besides I got a new key last year in August.
|
| 6th Oct 2024 6:46 pm |
|
|
