lccl148
Member Since: 30 Nov 2010
Location: Dartford, Kent. On the square, in the centre...
Posts: 65
|
D4 HSE Luxury 2016 model year front interior light |
|
In attempting to renew a capless interior light bulb, I have managed to push the bulbholder out of its mounting point towards the void in the headlining under the roof. To refit it looks straightforward enough but will entail removing the cowl that the interior light unit and sunroof switch are mounted in. As I have no wish to damage this or the headlining, can you advise the procedure for removing it please?
Many thanks in advance of your replies. I'm off to a party with the RNLI tonight. They may not get together very often, but when they do, they certainly know how to push the boat out.
|
5th Mar 2017 9:18 pm |
|
|
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
|
Put your fingers at the front and pull backwards and downwards and it should pop out quite easily, the same goes for the centre light housing Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
|
5th Mar 2017 10:48 pm |
|
|
lccl148
Member Since: 30 Nov 2010
Location: Dartford, Kent. On the square, in the centre...
Posts: 65
|
Thanks Ian, will give it a try today.
Jim. I'm off to a party with the RNLI tonight. They may not get together very often, but when they do, they certainly know how to push the boat out.
|
8th Mar 2017 6:28 am |
|
|