Triplet3
Member Since: 26 Nov 2016
Location: Southampton
Posts: 320
  
|
| Anyone have a Air Suspension Calibration tool in Southampton |
|
Hi all
Does anybody have a Air suspension callibration tool in or around Southampton?
My disco has a lean to the left, its level front to back but sits lower on the LH side (front and rear corners) of the car than it does on the right.
Its not losing air at all, goes up and down correctly but always leans to the left.
I figured it might just be a callibration issue. Rather try this first than replacing sensors/bags.
Thanks in advance
Chris 1995 Discovery 1 300TDI
2006 Discovery 3 TDV6 - Gone
1979 Series 3 109" - Gone
|
 1st Apr 2017 4:31 pm |
|
|
DrRobH
Member Since: 10 Oct 2015
Location: Hampshire
Posts: 927
|
West 4x4 in Bishops Waltham is your man.... Visitor from fullfatrr.com
RR Vogue SE 2011 4.4 TDV8
1974 Lightweight
|
| 1st Apr 2017 7:04 pm |
|
|
Triplet3
Member Since: 26 Nov 2016
Location: Southampton
Posts: 320
|
I'll check them out. Cheers bud! 1995 Discovery 1 300TDI
2006 Discovery 3 TDV6 - Gone
1979 Series 3 109" - Gone
|
| 1st Apr 2017 9:04 pm |
|
|
Maxc
Member Since: 19 Nov 2014
Location: Southampton
Posts: 29
|
I'm in Durley with several tools. I have an IID, but guess you wont get past the VIN lock. I also have a Foxwell NT510 that should do the job and is not locked to the vehicle so you are welcome to try it.
|
| 2nd Apr 2017 9:48 pm |
|
|
Triplet3
Member Since: 26 Nov 2016
Location: Southampton
Posts: 320
|
Cheers buddy that would be amazing! When would be a good time to pop round? I work in Winchester, finish at 5 most days (this week might be a bit iffy) but should be back to normal on Friday!
Don't mind coming later either! 1995 Discovery 1 300TDI
2006 Discovery 3 TDV6 - Gone
1979 Series 3 109" - Gone
|
| 3rd Apr 2017 12:05 pm |
|
|
Maxc
Member Since: 19 Nov 2014
Location: Southampton
Posts: 29
|
I work from home so any time is good. I'll PM you my number.
|
| 3rd Apr 2017 12:51 pm |
|
|
