Starlite87
Member Since: 15 Mar 2017
Location: Oxfordshire
Posts: 28
|
Hi I know this has been asked over and over, but does anyone know what needs to be done to put d4 seats in a d3? The passenger seat is working perfect except for the heated seat?
But I've got nothing on the drivers seat. No movement or heat, I've changed the polarity round, but still nothing. Is there a way to bypass the memory function? Also what needs to be done to get the heat working
Thanks in advance for any help
|
23rd Apr 2017 11:22 pm |
|
|
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14039
|
hi mate
i've upgraded mine from manual to electric
don't know how the wiring compares but have put a link here to see if it helps, in how to bypass the memory function
http://www.disco3.co.uk/forum/topic153555....eat+wiring
there is another link and will try and find it for u
hope that's of some use
gary
|
24th Apr 2017 10:40 am |
|
|
|
|
Starlite87
Member Since: 15 Mar 2017
Location: Oxfordshire
Posts: 28
|
Thanks for those links, they look very helpful. I will have a proper read through them when I'm home from work and give it ago. Thanks again
|
24th Apr 2017 3:09 pm |
|
|
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14039
|
always happy to help
know i wouldn't have been able to do the wiring without the great help i got from here
|
24th Apr 2017 3:46 pm |
|
|
LR3norway
Member Since: 25 Dec 2016
Location: NORWAY
Posts: 196
|
I am fitting it into a LHD car, how about getting a RHD right switch pack and wire loom for my LHD right seat? Would this make it easier?
|
26th Apr 2017 10:53 pm |
|
|
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14039
|
lr3
have wondered about that , in bypassing the memory function by getting another loom
would assume u would have to see if it's a 6 or 8 way seat
then getting the according loom , would also need the 6 or 8 way switches
normally the drivers seat is 8 way and passenger is a 6 way
hopefully someone with more experience will be able to clarify that for u, if my buying a loom and switch is an alternative in bypassing the memory box
don't know how expensive it would be though
|
27th Apr 2017 12:05 am |
|
|
LR3norway
Member Since: 25 Dec 2016
Location: NORWAY
Posts: 196
|
I would suppose the motors works fine without the memory wires attached. I think the only difference is the back support on the driverseat? Maybe a universal 2-way switch with spring could be used here. Not sure if the support have height adjustment besides in and out?
Think this is all the wiring needed?
http://www.ebay.co.uk/itm/262800008663
And this
http://www.ebay.co.uk/itm/262916320395
Maybe harder to find the parts from a LHD car.
|
27th Apr 2017 12:58 am |
|
|
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14039
|
not really sure if i'm honest seeing mine are d3 seats
ref the loom though i think it just needs to be either a 6 or 8 way
wonder if some of the other links or search may be able to verify the reg bits needed for a D4 seat
sorry that's not much help, just don't wish to give u any false info
as a side note , mines got the memory box and bypassed it, have bought an 8 x way loom for the drivers seat, just got to buy the 8 x way switch , but are expensive , so i should then in theory be able to take away the memory box away all together
on my 8 way switch it gives the adjustment
forward and back
back seat , forwards and back
front of seat up and down
back of seat up and down
|
27th Apr 2017 1:18 am |
|
|
LR3norway
Member Since: 25 Dec 2016
Location: NORWAY
Posts: 196
|
My passenger seat got front up and down adjustment, meaning 8-way? Then I guess it is on most D4s. Think I will give it a try.
|
27th Apr 2017 1:31 am |
|
|
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14039
|
sounds like it is 8 x way
when i looked on my passenger side that's only 6 x way , as the entire seat goes up and down
where on my drivers seat can adjust the height on the front and back, is good as it gives that extra support behind ur knees
plse let us know how u get on as i'm also interested to see if it works with u using another loom
|
27th Apr 2017 10:31 am |
|
|
Inigo
Member Since: 28 Feb 2012
Location: Kent
Posts: 295
|
I struggled fitting LHD seats in a RHD car.
Driver's side (which was originally a passenger's side seat) works fine (without memory).
Passenger's side, I can't get to work at all - except heated seat.
I'd be interested to hear how you get on.
|
27th Apr 2017 10:35 am |
|
|
LR3norway
Member Since: 25 Dec 2016
Location: NORWAY
Posts: 196
|
Ordered the parts now, will be 1-2 weeks.
Could anyone give me a straight forward idea of the passenger D4 wiring? Do you use some of the D3 parts for the heated seats?
Will get back with more when the parts received.
Thank you.
|
27th Apr 2017 12:28 pm |
|
|