Member Since: 07 Sep 2016
Location: Swindon
Posts: 96
Restricted Performance
Ive had this come up 3 times now.
The first time I just used my GAP 11D to reset and all was well.
Second time I forgot to check for error codes and when i re-started car all was well
Today I plugged in the 11D and got this.
L319 - Discovery 4 2010
Vehicle scanned on 17-07-2017 09:09
Using IIDTool BT V3.0 B2204
BCM-Body Control
B1D97-96 (2F) Tilt sensor - Component failure - internal failure
( on 13-07-2017 09:23:34 at 124423 km )
B10F8-13 (2F) Accessory socket 'A' relay - General electrical failure - circuit open
( on 13-07-2017 09:26:47 at 124423 km )
IPC-Instrument Pack
B1A85-96 (28) Ambient light sensor circuit - Component failure - internal failure
( on 15-07-2017 01:14:17 at 124440 km ).
Took car to my local indy and he plugged his expensive "SUN" system in and it showed error code P006A.
My 11D does not show this, anyone know why.
Indy says looks like split inlet manifold, he will do a smoke test to be sure.
If confirmed it looks like a £1000 fix.Disco 4 XS 2010 Auto.
Stornaway Grey
Side steps.
I've had both inlet manifolds done on my MY11 D4. The O/S was done in Oct 2015 at about 95k miles and the N/S last week with 111k on the clock.
Mine was just shy of £800 inc VAT from my local indy, with Warranty Direct footing the bill for everything except the excess and injector pipes.Front Runner Rack, OEM Ladder & RAI, Tuff-Trek Foxwing, B'rakhah Ingonyama Expedition Trailer, RLD's Spare Wheel Protector, Bodsy's Bars, Empty Pockets! Member of Gloucestershire & Worcestershire 4x4 Response.
17th Jul 2017 10:54 am
Middlk
Member Since: 07 Sep 2016
Location: Swindon
Posts: 96
Whoever thought to use plastic for inlet manifolds.
Crazy.
Indy says it may be a pipe but I'm not getting my hopes up.
I'll report back when i know more.Disco 4 XS 2010 Auto.
Stornaway Grey
Side steps.
Do you know if its the O/S or N/S? There's a TSB on the O/S...plenty on here about it.
Front Runner Rack, OEM Ladder & RAI, Tuff-Trek Foxwing, B'rakhah Ingonyama Expedition Trailer, RLD's Spare Wheel Protector, Bodsy's Bars, Empty Pockets! Member of Gloucestershire & Worcestershire 4x4 Response.
17th Jul 2017 11:04 am
Middlk
Member Since: 07 Sep 2016
Location: Swindon
Posts: 96
Off side.Disco 4 XS 2010 Auto.
Stornaway Grey
Side steps.
17th Jul 2017 11:12 am
Middlk
Member Since: 07 Sep 2016
Location: Swindon
Posts: 96
Has anyone ever tried to repair the inlet manifold with Araldite?
I would have thought if the seam weld was well cleaned and roughed up, then Araldite should work.
Any thoughts from you clever chaps out there.Disco 4 XS 2010 Auto.
Stornaway Grey
Side steps.
17th Jul 2017 2:10 pm
Projectblue
Member Since: 15 Feb 2009
Location: South West
Posts: 166
Mine had same fault. Local indy quoting £550 for one side, £800 for both as the bits are off so less labour, therefore saving.
Parts are on back order with LR so I suspect there is a widespread problem with this.
Shame I can't chance my arm with LR but it's 5 years and 95k on it so reckon they would wash their hands of it D3 2.7tdv6 SE Manual - SOLD
Defender 110 2.4tdci - SOLD
Defender 130 2.4tdci - SOLD
D4 3.0SDV6 HSE
Has anyone ever tried to repair the inlet manifold with Araldite?
I would have thought if the seam weld was well cleaned and roughed up, then Araldite should work.
Any thoughts from you clever chaps out there.
touch wood not needed this but certainly Araldite or other high strength glue would surely be worth a try ? what about fibre glass resin ? it would soak into the crack before it went off..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
26th Jul 2017 8:47 pm
Middlk
Member Since: 07 Sep 2016
Location: Swindon
Posts: 96
Had a smoke test done and it turned out the leak was from the joint where the air inlet joins the throttle body.
I had to buy a new Throttle body at £296 inc VAT. Better than the £900 I was quoted for the manifold split.
Fitted today and tested all okay.
Trying to find a price now to have the EGR's blanked. Supplied and fitted.Disco 4 XS 2010 Auto.
Stornaway Grey
Side steps.
8th Aug 2017 6:59 pm
adam
Member Since: 20 Sep 2005
Location: Home and Happy
Posts: 6917
Have you seen my thread? - similar to yours - hopefully having a smoke test tomorrow - so fingers crossed
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum