Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Technical (D3)

Air Con IID Question
Post Reply  Down to end
Page 1 of 1
ChrisGT4
 


Member Since: 25 Nov 2017
Location: Lincoln
Posts: 29

United Kingdom 2007 Discovery 3 TDV6 SE Auto Java BlackDiscovery 3
Air Con IID Question

Hi All,

After looking through the live values on my IID tool I noticed my air con system pressure is showing as zero, the air con is not particually cold when I put the temp on low, do you know if this this live value is to be trusted? and do you think its indicating a leak in the system?


  
Post #190008711th Jan 2018 1:14 pm
View user's profile Send private message View poster's gallery Reply with quote
Kilovolt
 


Member Since: 29 Jun 2015
Location: South Derbyshire
Posts: 1061

United Kingdom 2013 Discovery 4 3.0 SDV6 Commercial XS Auto Baltic BlueDiscovery 4

If it's anything like the air con in my M3 track car, if the pressure drops below x then the compressor will not be allowed to kick in (the magnetic coil clutch will not be energised).

If you switch the A/C on and off can you hear the compressor cutting in and then out etc.

If it does not engage that could be suggestive of low pressure preventing it.

Just a thought.
 "Track day running - Don't put your foot back on the accelerator until your absolutely sure you don't have to take it off again"

Current Ride: D4 XS Commercial Baltic Blue SDV6 fully loaded with heated everything Smile
Track Days: BMW E36 M3 Evolution MY 1996 (3.2 Litre 377 BHP sat in 1,250 Kgs of car, with a pro safety cage and some serious braking power) Smile 
 
Post #190008811th Jan 2018 1:18 pm
View user's profile Send private message View poster's gallery Reply with quote
ChrisGT4
 


Member Since: 25 Nov 2017
Location: Lincoln
Posts: 29

United Kingdom 2007 Discovery 3 TDV6 SE Auto Java BlackDiscovery 3

ok thanks, will have another look and listen for the compressor, i'm thinking it may have a leak and needs fixing then re-gassing Sad
  
Post #190009111th Jan 2018 1:21 pm
View user's profile Send private message View poster's gallery Reply with quote
DiscoJeffster
 


Member Since: 27 Feb 2016
Location: Perth
Posts: 204

Australia 2010 Discovery 4 3.0 TDV6 HSE Auto Nara BronzeDiscovery 4

I wouldn’t necessarily trust the IID value. Many selectable options exist in software but some are not available across various models as sensors don’t exist etc.
  
Post #190010411th Jan 2018 1:52 pm
View user's profile Send private message View poster's gallery Reply with quote
geoffsnook
 


Member Since: 13 Jun 2014
Location: south wales
Posts: 3169

Wales 

That does mean there is no gas in the system so it will not work the condenser on the front is the usual one changed one on my disco and one in my range rover Thumbs Up
 Discovery 3 se gone
Range rover sport supercharged here:) 
 
Post #190022711th Jan 2018 7:00 pm
View user's profile Send private message View poster's gallery Reply with quote
geoffsnook
 


Member Since: 13 Jun 2014
Location: south wales
Posts: 3169

Wales 

They lose about 10% of gas each year so if it has not be checked for a while it may need to be re-gassed take it to kwick-fit i think they do a £49 check and refill and if it don't work you pay and i have heard some people take it back after a while when the problem is fixed and had it regassed Thumbs Up
 Discovery 3 se gone
Range rover sport supercharged here:) 
 
Post #190023311th Jan 2018 7:06 pm
View user's profile Send private message View poster's gallery Reply with quote
kajtzu
 


Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6738

Finland 2005 Discovery 3 4.4 V8 HSE Auto Cairns BlueDiscovery 3

ChrisGT4 wrote:
ok thanks, will have another look and listen for the compressor, i'm thinking it may have a leak and needs fixing then re-gassing Sad


You should be able to take it for a test and refill. The machine which does it first sucks out the old refrigerant so there is a vacuum, then does a pressure test for 20 minutes or so. Only after that is it refilled. When I got mine done a 1/2 year ago they added some kind of dye which was supposed to make it easier to find eventual leaks.
  
Post #190023611th Jan 2018 7:12 pm
View user's profile Send private message View poster's gallery Reply with quote
lynalldiscovery
 


Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274

United Kingdom 2006 Discovery 3 TDV6 Metropolis LE Auto Bonatti GreyDiscovery 3

Its a vac test the machine does, problem is vac does not always find positive pressure leaks, for that you need a nitrogen bottle and a squirty soapy water bottle
  
Post #190024711th Jan 2018 7:27 pm
View user's profile Send private message View poster's gallery Reply with quote
Erea
 


Member Since: 19 Mar 2012
Location: Munster
Posts: 1509

Ireland 2006 Discovery 3 TDV6 Commercial Manual Zambezi SilverDiscovery 3
Re: Air Con IID Question

ChrisGT4 wrote:
Hi All,

After looking through the live values on my IID tool I noticed my air con system pressure is showing as zero, the air con is not particually cold when I put the temp on low, do you know if this this live value is to be trusted? and do you think its indicating a leak in the system?




I must try that setting tomorrow and see what value it shows. mine is an ‘06 so just coming up on 12 years old and I haven’t put gas in it since I got it in 2010. But it’s still as cold as ice when used Thumbs Up
  
Post #190025911th Jan 2018 7:44 pm
View user's profile Send private message View poster's gallery Reply with quote
geoffsnook
 


Member Since: 13 Jun 2014
Location: south wales
Posts: 3169

Wales 

As lynalldiscovery says you need to have a nitrogen test if you want to find it as a vacuum test will actually seal a small leak so you will never know so either fill it with gas and uv dye and see what happens or get someone to test it with nitrogen Thumbs Up
 Discovery 3 se gone
Range rover sport supercharged here:) 
 
Post #190027811th Jan 2018 8:18 pm
View user's profile Send private message View poster's gallery Reply with quote
ChrisGT4
 


Member Since: 25 Nov 2017
Location: Lincoln
Posts: 29

United Kingdom 2007 Discovery 3 TDV6 SE Auto Java BlackDiscovery 3

Thanks for the advice guys, will get it tested and refilled.
  
Post #190032211th Jan 2018 9:16 pm
View user's profile Send private message View poster's gallery Reply with quote
Erea
 


Member Since: 19 Mar 2012
Location: Munster
Posts: 1509

Ireland 2006 Discovery 3 TDV6 Commercial Manual Zambezi SilverDiscovery 3

With the car stopped for about 20 minutes I tested mine and it showed a pressure of 6.1 bar. The air con was very cold on my car The last time I used it.
  
Post #190048212th Jan 2018 11:04 am
View user's profile Send private message View poster's gallery Reply with quote
MikeBob
 


Member Since: 19 Sep 2016
Location: Pretoria
Posts: 115

South Africa 2010 Discovery 4 3.0 TDV6 SE Auto Ipanema SandDiscovery 4

my pressure reading was 10.2 bars
  
Post #190074713th Jan 2018 5:50 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site