Member Since: 14 Nov 2015
Location: bristol
Posts: 46
L320 Suspension calibration driving me MAD
Ive got the new software on my IID tool which is easy to use.
For some reason my L320 seems to sit abit low on the front and 15-20mm heigh on the rear.
I adjust the calibration to 461/465 as per tool and its sets height. I click on apply, then as soon as i drive it down the road it says raising suspension on dash and goes to about 480mm on the rear! Wtf. Ive gone through this time and time again. No change.
Can anyone help?
Ive tryed to just adjust the rear height cant seem to go lower - just higher!
Cheers
Spencer
15th Jul 2018 5:50 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Sensors ok?
15th Jul 2018 5:52 pm
lamb190
Member Since: 14 Nov 2015
Location: bristol
Posts: 46
I dont think i have any sensor errors?
The suspension heigh button works (all heights change)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
