| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
RyanR
Member Since: 29 Apr 2018
Location: Nova Scotia
Posts: 46
  
|
Today I set up my IIDtool and uploaded the latest firmware to it. One reason for getting it was to disable the TPMS. After I went in to the CCF and the TPMS subsection and selected TPMS not fitted, I tried to upload the changes but I received a failure message. It goes as far as asking me to switch the ignition off/on and then when I select continue it indicates the update failed. This is on a 07 LR3.
I was able to clear the faults though so at least it isn't flashing the tire pressure light on startup though it still remains lit. Has anyone else experience this? I did read some old threads that seemed to indicate that there were subsections in the Body Control section of the CCF for the TPMS however mine doesn't list any. Possibly those threads were from old firmware?
Ryan R
|
 28th Jul 2018 7:31 pm |
|
|
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
  
|
I've not had a D3 however recently cleared the service indicator on one. We had the engine running to start, the IID told me to turn it off and ignition on. The owner did that, but he just turned the key so the radio was playing - then the update failed. I turned it off then ignition on so all the lights on the dashboard were on, then it worked. So does the key go - off - accessories - ignition - start ? If so just make sure you turn the ignition on not just the acc.
Ron 2016 D4 TDV6 Corris Grey
IIDTool BT
|
| 29th Jul 2018 6:54 am |
|
|
RyanR
Member Since: 29 Apr 2018
Location: Nova Scotia
Posts: 46
|
I started with the key in the on(II) position and then went off back to on(II) when it asked me to. I don't believe it wanted the vehicle to be started.
|
| 29th Jul 2018 11:32 am |
|
|
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
|
Ok that's ruled out then. Maybe send an email to GAP, although I understand they are out of the office for the holidays for a while. 2016 D4 TDV6 Corris Grey
IIDTool BT
|
| 29th Jul 2018 11:39 am |
|
|
YubYub
Member Since: 27 Feb 2015
Location: Vienna
Posts: 21
  
|
I had the same issue, and I needed a firmware update from Pat direct to fix it. It seems they have a problem with their TPMS writing that needs a specific firmware version to work. Pat sorted it in a day for me (due to the time difference to Canada). IIDTool in Vienna, Austria - happy to share!
|
| 31st Jul 2018 7:49 am |
|
|
scraig
Member Since: 06 Feb 2011
Location: Langley, BC
Posts: 100
|
Hi RyanR,
Did you get this figured out? I'm on the verge of purchasing the GAP tool with the prime motivation of disable the TPMS.... Stewart
|
| 14th Sep 2018 8:25 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
