| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
Mcflori
Member Since: 07 Sep 2018
Location: Munich
Posts: 29
  
|
Hi all.
It seems that since I used my IID tool, the start start/Stop system only acts vey very occasionally. Sometimes it doesn’t work for weeks.
Also after changing the CCF with the tool, it takes several minutes and i need to lock the car until the message Start/Stop is inactive“ disappears.
Only changes I made is to active the fuel burner heater. But I didn’t use it in the past month.
Any idea if this is normal?
Thanks
|
 8th Oct 2018 9:06 am |
|
|
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
 
|
Change it back and see if this behaviour stops? I doubt that it would be the tool but it may be related to the FBH.
Ron 2016 D4 TDV6 Corris Grey
IIDTool BT
|
| 8th Oct 2018 7:14 pm |
|
|
jonp
Member Since: 09 Jan 2010
Location: BARNARD CASTLE , Co Durham
Posts: 98
 
|
Start stop will stop working if your battery is low , or in a poor state and needs replacing. I assume it monitors the voltage in order to prevent you being stuck in traffic unable to start the car again as all that restarting the car will drain the battery
Regards
Jonathan
|
| 8th Oct 2018 8:02 pm |
|
|
Washwipe
Member Since: 19 Apr 2013
Location: Bucks Oxon Herts Border
Posts: 3169
|
Mcflori wrote:Hi all.
Also after changing the CCF with the tool, it takes several minutes and i need to lock the car until the message Start/Stop is inactive“ disappears.
Thanks
Normal, the ECO light is lit after any changes, once it’s gone to sleep, about twenty minutes, it will be extinguished on the next start.
|
| 8th Oct 2018 8:14 pm |
|
|
Houghta
Member Since: 05 Nov 2016
Location: Northumberland
Posts: 128
|
i have had my D4 for 4 months now and the stop start has worked twice and the 2 times it worked were within 3 minutes of each other
|
| 9th Oct 2018 11:39 am |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8230
|
I’ve had mine nearly 12 months and it has never worked and no warning light despite fitting a new auxiliary SS battery and the main battery reading 12.76v  It can when others can't,
It will when others won't,
It goes where others don't.
|
| 9th Oct 2018 12:59 pm |
|
|
Washwipe
Member Since: 19 Apr 2013
Location: Bucks Oxon Herts Border
Posts: 3169
|
Mines always done it, started when Bodsy fitted the remote for the heater, he advised it probably would and it did, been like since.
Stop Start hasn’t worked for ten months, working now since LRA fitted a new battery ten days ago, even in a morning after its only been running a few minutes.
|
| 9th Oct 2018 4:54 pm |
|
|
mike23118
Member Since: 01 Oct 2010
Location: North Wales
Posts: 1028
 
|
Mine is so annoying, when I drive home I turn around to reverse into my drive by the time i stop and select reverse it bloody stops, any way of delaying it a bit without turning it off?
|
| 10th Oct 2018 7:08 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
