Member Since: 22 Aug 2013
Location: Dublin
Posts: 145
Suspension failure
Hi All, my suspension has bottomed out and there is no sound from the pump. This the error that I get with my GAP tool. After clearing the errors C1A20-64 just comes back. I checked the fuses, does anyone know what would be the most likely cause? Thanks
18th Nov 2018 1:28 pm
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
If there is still no sound from the pump after clearing the faults it will be a electrical fault in the motor on the pump. Just check there is power to the plug that supplies the power to the pump and if there is 12v there (with engine running) then check continuity of the motor. Alternatively you can supply the compressor with 12v from a separate battery to see if it works or not This can all be done with just removing the bottom guard on the compressor.
Pete.IID, webasto software and workshop facility's available.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
