cold_n_wet
Member Since: 05 May 2009
Location: Bergen
Posts: 1509
|
| GVIF Version 8 - installion |
|
Chaps,
Struggling with a GVIF REV 8.0.
Connected y cable to navi,
red 12v
black 0V
Grey to trigger
Dip switch settings
1 down or up no change.
2 up
3 up
4 up
5 up
6 up
7 down
8 up
When I triger unit to switch to reverse camera (+12v grey lead) the unit relay clicks, it switches from navi to black screen.
But nothing else, no green light.
removing 12v on grey lead triggers navi screen to come back.
I tried another camera and confirmed that this camera works oK on external monitor, then plugged in the reverse camera in monitor and get a picture.
The instructions supplied are fairly confusing, mostly for a Lexus.
Any help appreciated.
Glen IDTOOL PRO / Faultmate programing and BAS remaping services in Norway.
Diagnostic for most Land rover vehicles
Land Rover parts and accessories.
Stockist of RLD equipment.
www.praesto4x4.no
D4 gone, missed but replaced with a 110 Puma.
|
 22nd Nov 2018 10:28 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
  
|
It's possible you have the video input and output cables the wrong way round. That would cause your symptoms.
I actually had to connect the CAN bus upto the satnav bus.
|
| 22nd Nov 2018 12:23 pm |
|
|
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
 
|
You do have the screen on Satnav screen don’t you....? Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
| 22nd Nov 2018 10:49 pm |
|
|
