MrBrain
Member Since: 12 Mar 2014
Location: bucks
Posts: 472
  
|
| Engine check light but no faults? |
|
Hi, so I have an IID bluetooth tool. Currently its not registered to the car and I am awaiting GAP to sort it out as there seems to be some confusion as I was sent an unlock code that didn't work.
Whilst waiting for that though, I had the yellow engine warning on the dash today.
I plugged in the IID tool and read the faults.... NONE.
I thought it would show and clear all faults even if not registered?
|
 3rd Dec 2018 6:10 pm |
|
|
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
  
|
Yes it should. Maybe there are "unconfirmed" faults? In the app you can select if you want to see those. I think the default is to see "confirmed" faults. 2016 D4 TDV6 Corris Grey
IIDTool BT
|
| 3rd Dec 2018 6:39 pm |
|
|
MrBrain
Member Since: 12 Mar 2014
Location: bucks
Posts: 472
|
I selected everything from the options menu....
I am new to the D3 and iid tool, so perhaps i did something wrong..
|
| 3rd Dec 2018 6:41 pm |
|
|
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
|
If you clear all faults, does the light stay on? Or go off and then comes back on when driving? 2016 D4 TDV6 Corris Grey
IIDTool BT
|
| 4th Dec 2018 8:47 am |
|
|
MrBrain
Member Since: 12 Mar 2014
Location: bucks
Posts: 472
|
The fault is there permanently.
I clear all faults shown on other ECUs, which seemed to mostly be speaker cable issues (presumably from where it was unplugged) so that I have no faults showing, but the light is still on.
|
| 4th Dec 2018 8:57 am |
|
|
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
|
You'll need the Aussie taxi driver approach then (which is to ignore it) 2016 D4 TDV6 Corris Grey
IIDTool BT
|
| 4th Dec 2018 9:03 am |
|
|
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
|
Send GAP an email about it, maybe there are some codes they can't read. 2016 D4 TDV6 Corris Grey
IIDTool BT
|
| 4th Dec 2018 9:10 am |
|
|
MrBrain
Member Since: 12 Mar 2014
Location: bucks
Posts: 472
|
Well I definitely cant take the "ignore it" approach. And I am talking to GAP about it, but no luck so far.
|
| 4th Dec 2018 9:11 am |
|
|
MrBrain
Member Since: 12 Mar 2014
Location: bucks
Posts: 472
|
So it appears that the Bluetooth comms to the phone is playing up. Gap blame my Sony phone.
Using the cruise control switches I identified a throttle position fault, which when cleared has not so far returned.
|
| 4th Dec 2018 8:35 pm |
|
|
salmoner
Member Since: 09 May 2014
Location: Blackpool
Posts: 156
 
|
This is interesting . I've been having similar issues with mine , ran a fault scan and it came back no faults , did this several times with the same result tried it on another d3 and got the same thing , but then it started locking up part way through a fault scan I got onto gap sent them a bug report . Pat said try to reboot my phone which is what I did still the same , then was told to try another phone still got all the issues.
they are now sending ne a new lld tool from Canada . so just waiting for that to arrive 
|
| 4th Dec 2018 10:42 pm |
|
|
MrBrain
Member Since: 12 Mar 2014
Location: bucks
Posts: 472
|
I tried a different phone and it showed no faults on the car, then crashed.... So I still dont know what's wrong with the iid tool.
|
| 4th Dec 2018 10:47 pm |
|
|
salmoner
Member Since: 09 May 2014
Location: Blackpool
Posts: 156
|
That's basically what's happened to mine as I said there sending me a new 1 as of today ,
Pat said its a first with this issue , think you should get back onto them but it depend how old your lld tool is . mine was still under warranty as it was new at the beginning of the year
|
| 4th Dec 2018 10:52 pm |
|
|
MrBrain
Member Since: 12 Mar 2014
Location: bucks
Posts: 472
|
I've had mine two years and used it once.... I'll be very upset if it's fubar.
|
| 4th Dec 2018 11:03 pm |
|
|
salmoner
Member Since: 09 May 2014
Location: Blackpool
Posts: 156
|
it will be out of warranty I expect . I've used mine quite a bit in the time I've had it and generally plug it in once a month just to clear any fault that might be there maybe I've been using it to much
|
| 4th Dec 2018 11:11 pm |
|
|
pjm-84
Member Since: 04 Oct 2016
Location: Hampshire
Posts: 2588
|
You should have some faults. I think I have 6 or 7 on mine. Two relate to the steering column. No signal from the electrical adjustment servos ( it's manual adjust). Another is a low voltage on the accelerator. (LR's advice was to ignore as it was still working 100%). The others are minor but the items are 100% working.
|
| 4th Dec 2018 11:39 pm |
|
|
