Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225
Iid on none registered vehicle?
Will the Iid tool read not change the CCF on a vehicle it is not registered to? - I don’t want to make a fool of myself if it won’t It can when others can't,
It will when others won't,
It goes where others don't.
5th Jan 2019 9:06 am
JonM
Member Since: 24 May 2012
Location: North Yorkshire
Posts: 1247
I don't think so. It will do fault codes and live values but not CCF unless it's registered.MY2022 D5 HSE D300 - with extra nice bits added
MY2019 D5 HSE 3.0 SDV6 - sold to a dealer for a crazy price! - So good I bought another!
MY2012 D4 HSE 3.0 SDV6 - retired to a new home
5th Jan 2019 9:10 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73082
Deffo won’t do CCF edit or ECU reflashing on unregistered vehickle.
5th Jan 2019 9:57 am
dorianwoolger
Member Since: 11 May 2018
Location: Tangmere
Posts: 223
I have 2 LRs and I can confirm that CCF could not be read on the 2nd until it was registered but it could read fault codes.Dorian Woolger
Amateur Call: 2E0FSI
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225
- SIL’s D4 keeps blowing halogen headlamp bulbs, even when he bought it one was out within a few days, my guess is it is set to xenons.It can when others can't,
It will when others won't,
It goes where others don't.
5th Jan 2019 11:34 am
3disco
Member Since: 23 Sep 2010
Location: devon chardstock
Posts: 504
I thought that if it was set to xenon it would do either.
5th Jan 2019 1:04 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225
Yes it will do both until it blows a bulb, when set to xenon a high “charge” is sent on start up to ignite the xenon, just like a fluorescent tube has a starter, this charge invariably blows a halogen bulb, although there may be another fault elsewhere.It can when others can't,
It will when others won't,
It goes where others don't.
5th Jan 2019 4:26 pm
3disco
Member Since: 23 Sep 2010
Location: devon chardstock
Posts: 504
Is that high charge not all part of the xenon headlight assy which if changed to a halogen version would not be there?
5th Jan 2019 4:42 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225
If you operate xenons with halogen firmware they will work but will flicker on/off on start up, just like a fluorescent tube when the starter has failed.It can when others can't,
It will when others won't,
It goes where others don't.
5th Jan 2019 6:12 pm
3disco
Member Since: 23 Sep 2010
Location: devon chardstock
Posts: 504
Probably thinking of my freelander2 which needing configuring for xenons if fitted with halogen from the factory but once xenon headlights removed and halogen refitted no need to reconfigure.
5th Jan 2019 6:38 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225
That correct, but the halogen bulbs will have a premature life due to the high voltage being put into them when they are first switched on. The bulbs will only last 12 months maximum, probably a lot less. This is exactly the situation with SIL’s D4 It can when others can't,
It will when others won't,
It goes where others don't.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
