Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4252
[For Sale] 2nd battery wiring kit and battery (if collected)
Bought this from DSL with the intention of fiting to a Disco but now decided on a FFRR so will not fit
Original text from DSL below
Looking for £25 collected or £50 including the battery - will try and add the images tomorrow.
Wiring kit for 2nd battery.
£27 delivered, unfortunately all that copper is heavy.
This is the wiring & solenoid needed for a 2nd battery for both D3 and (as just taken out of) the D4.
Click image to enlarge
Not all the spade connectors are there, some crimping or soldering will be needed, plus fitting to a D4 is quite an involved process, unlike the D3 which is relatively straight forward.
The kit includes:
Positive lead that goes from the +ve of the crank battery to one side of the solenoid.
Positive lead that goes from the other side of the solenoid to the +ve pole of the Aux battery
Negative lead that goes to the earthing stud beside the battery from the -ve post of the aux battery.
Negative “sensing” lead for the switching feed, again to same earthing stud.
Positive feeds from the +ve terminal of the aux battery to the fuse box (left in the car).
A load of wiring that was put in place to take two heavy(ish) feeds to the rear to put power to the cubby hole covers, a job I didn’t do. That’s 2 x ~6.6m feeds, more than enough to allow it to go anywhere, plus a spur near the “front” to take a cable to the solenoid output to make the aux ciggie sockets live off the Aux battery.
Threes cables to battery above, spur to relay output below.
Upper left is the Albright solenoid. Fitted after I went through 3 “cheap” solenoids, as recommended by an electrics guru on here, and it has been brill.
Click image to enlarge
The battery mounting bracket is for the correct side, the aux battery side, however the poles that it fixes to were left in the D4.
Not in that pic is a pos lead for the sensing feed, this was fixed to the pollution sensor behind the grill, would need to be connected to an ignition only positive feed to work the solenoid “bridge”, my non techie term.
Click image to enlarge
Any questions, please ask. Mr. GreenI want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
3rd Jan 2019 10:29 pm
Iguana
Member Since: 14 Oct 2013
Location: 'Sunny' Zomerset
Posts: 9424
Dibs on the wiring kit please
PM on way
Couldn't see any of the images thoughIggy/Ieuan
Current LR =
2015 RR Sport Autobiography
&
1992 Land Rover Defender Camper
- Gone but not forgotten:
MY10 D4 GS
MY05 Disco 3 'S'
MY14 FL2 HSE manual in Blue
MY15 Disco 4 HSE Lux in Santorini Black
MY08 Disco 3 SE manual in Buck Blue
1960 Series 2 88" (No idea why I sold it!)
3rd Jan 2019 11:30 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73125
Some pics in my original add. And no, socks were not included.
Member Since: 14 Oct 2013
Location: 'Sunny' Zomerset
Posts: 9424
Iggy/Ieuan
Current LR =
2015 RR Sport Autobiography
&
1992 Land Rover Defender Camper
- Gone but not forgotten:
MY10 D4 GS
MY05 Disco 3 'S'
MY14 FL2 HSE manual in Blue
MY15 Disco 4 HSE Lux in Santorini Black
MY08 Disco 3 SE manual in Buck Blue
1960 Series 2 88" (No idea why I sold it!)
for those too lazy to follow the link ( or to post the pics in here ! ) …
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
Click image to enlarge
4th Jan 2019 8:57 am
Iguana
Member Since: 14 Oct 2013
Location: 'Sunny' Zomerset
Posts: 9424
Just hot to work out how to fit it now Iggy/Ieuan
Current LR =
2015 RR Sport Autobiography
&
1992 Land Rover Defender Camper
- Gone but not forgotten:
MY10 D4 GS
MY05 Disco 3 'S'
MY14 FL2 HSE manual in Blue
MY15 Disco 4 HSE Lux in Santorini Black
MY08 Disco 3 SE manual in Buck Blue
1960 Series 2 88" (No idea why I sold it!)
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73125
Absolutely, holes underneath and not visible.
Iggy, I can give you long distance help fitting it. If you’re feeling brave.
Only kidding, it’s really simple.
4th Jan 2019 12:45 pm
Hot Tub
Member Since: 15 Aug 2017
Location: Milton Keynes
Posts: 1071
Iggy you said no mods planned & so you start on that slippery slope Welsh Collie Chauffeur Service To Barney & Rooney.
4th Jan 2019 12:46 pm
Iguana
Member Since: 14 Oct 2013
Location: 'Sunny' Zomerset
Posts: 9424
A coin tray arrived today also!
Already has a sump protector
Looking at rear drawers (make my own) and of course do a rear cubby 12v thing (got 2 ready to start making in the garage)
Del, I may drop you a pm with some daft Q's when it arrives
Iggy/Ieuan
Current LR =
2015 RR Sport Autobiography
&
1992 Land Rover Defender Camper
- Gone but not forgotten:
MY10 D4 GS
MY05 Disco 3 'S'
MY14 FL2 HSE manual in Blue
MY15 Disco 4 HSE Lux in Santorini Black
MY08 Disco 3 SE manual in Buck Blue
1960 Series 2 88" (No idea why I sold it!)
4th Jan 2019 1:03 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73125
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
) …
