I found it was easier to leave the window regulator loose in the door, click the window into position then lift the regulator up and bolt it in.D1 300TDI ES. just kept going, sold at 170k miles, body beginning to rust
D2 TD5 GS. sold at 140k, chassis beginning to rust
D3 TDV6 SE. 194k Still going.
24th Feb 2019 6:39 pm
sasdiscos
Member Since: 22 Feb 2013
Location: Northants
Posts: 889
Thanks, managed to drill it out and replace with a metal dome head bolt. Just the job.
SteveYou remind me of a younger me, not much younger mind...perhaps even a little older!
25th Feb 2019 11:30 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
Hi
Also used those clips when mine broke , was good fun trying to mess around holding the window
Then I got some suction holders that I found invaluable
25th Feb 2019 11:55 am
sasdiscos
Member Since: 22 Feb 2013
Location: Northants
Posts: 889
I couldn’t for the life of me get the regulator out the door! Had to do it all in place. Window came out easy enough tho.You remind me of a younger me, not much younger mind...perhaps even a little older!
25th Feb 2019 2:01 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14129
Hi
Ah yes , now that was good fun, I removed the front glass runner, then tipped the regulator on its side and it came out, fitted a new one at the same time of fitting new glass securing clips
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
