Paul68
Member Since: 01 Mar 2015
Location: Dudley
Posts: 356
|
Helped needed fitted new hpfp now getting p2288-00 injector control pressure too high
Just keeps rising then goes into limp mode if I press accelerator revs then pressure drops down to normal
Any ideas
|
8th Jan 2019 7:26 pm |
|
|
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
|
Is it the correct pump?
I ask as I believe the later D3 2007 onwards run at a higher rail pressure?
|
8th Jan 2019 10:15 pm |
|
|
MatcherMike
Member Since: 15 Sep 2012
Location: Gloucestershire
Posts: 94
|
Hi.
Have you replaced the fuel filter? Recommend a genuine one. And check the connections are correct.
This resolved my issue with this code and stalling on accelerator https://www.disco3.co.uk/forum/fault-code-...72-15.html
Mike
|
8th Jan 2019 10:19 pm |
|
|
Paul68
Member Since: 01 Mar 2015
Location: Dudley
Posts: 356
|
Replaced filter and it is a brand new pump and the correct one
How can I test the low pressure pump in tank?
|
9th Jan 2019 5:35 pm |
|
|