Member Since: 17 Jun 2008
Location: widnes, cheshire
Posts: 117
Park brake fault
Hi guys, got a problem with my parking brake. It won’t engage or disengage using the switch inside the car. I have a red and amber fault lights on the dash and it says park brake fault. I can however engage and disengage it with the Iddtool
Any idea what he problem is?
Ps forgot to mention, this fault occurred when driving down a track full of potholes with water/ ice and just another update, I can no longer engage and disengage it with the iidtool😭
17th Feb 2019 4:06 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10365
the first problem sounds like the switch/lever you pull/push in the cab. you may as well take it out and maybe give it a clean inside. and if that don't help (after clearing codes) get a replacement.
not sure on the 2nd problem. It may fix itself if your lucky!
17th Feb 2019 4:25 pm
Batfink
Member Since: 31 May 2017
Location: Isle of Sheppey
Posts: 1510
Mine is doing the same. Suspect either poor contact on connectors by n/s rear wheel arch and found out there is a connection about half way down car on underside also on the n/s. Would start with the connector blocks. I have visually inspected my connectors but didnt realise you can unplug them.2006 TdV6 HSE.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
