Member Since: 23 Dec 2018
Location: Horley
Posts: 56
Front Door Speaker Wiring Loom
Hi all.
I have a D3 TDV6 S model and have recently swapped the two front door cards (the old ones were very shabby) with both the front passenger and front drivers door cards from an HSE model. Both the old cards and the replacement ones from the HSE have Harman/Kardon speakers so the swap was very easy.
The difference between the door cards is that my old ones had one speaker cover and the ones from the HSE have two speakers covers - and a speaker actually attached to the door card itself (the upper one of the two on each door card).
I issue I have is that I couldn't find a connector on my existing wiring loom to connect this additional speaker. I did however find a foam wrapped connector at the base which is for the puddle lights (which I didn't have on my TDV6 S). I unwrapped these connectors and now have puddle lights which is a bonus.
My question is: Have a I missed the spare speaker connector anywhere or do I need to purchase two new speaker looms to hook up these other speakers? It's not a major issue but seeing as I've now got additional speakers I may as well use them. any help or guidance will be appreciated. Cheers all
17th Feb 2019 12:10 pm
Famousfive
Member Since: 12 Aug 2014
Location: Southampton
Posts: 1832
It might not be straight forward.
If you need to get new looms for the door for those speakers are you confident there is a cable running from the amp to the door connector to send the tweater signal in the first place.... might be a bigger job than you had first thought. First question is what type of amplifier do you have?Stolen - D4 Loire Blue
D4 Bali Blue
17th Feb 2019 2:51 pm
Johno247
Member Since: 23 Dec 2018
Location: Horley
Posts: 56
Thanks for the reply. Not sure what Amp I have in the car. I'll have a look later to see if there's a make or code on it. All I know is that it's a 2008 vehicle and has the Harman/Kardon system. As I put in my initial post, it's not a great issue but if it's an easy fix I'll tackle it.
17th Feb 2019 4:12 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
see if you have a black or silver amp under the drivers seat.
I don't think a door loom is the answer.
17th Feb 2019 5:37 pm
Johno247
Member Since: 23 Dec 2018
Location: Horley
Posts: 56
Hi Pete,
It's a silver Amp. Strange thing is it looks as though wiring under the seat has been moved at one time or another as one of the clips is not in its housing (the seats aren't electric). There is also a black box near to the Amp (not sure if it feeds into the Amp or not as it's dark now but I'll check tomorrow). I took a photo of the box and to my surprise it has Ford embossed on it. See photo below.
17th Feb 2019 6:01 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10684
Is that ford box at the front of the seat?
Looks like seat connector
17th Feb 2019 6:32 pm
Johno247
Member Since: 23 Dec 2018
Location: Horley
Posts: 56
Yes its at the front. On the left hand side as you look at the seat.
17th Feb 2019 6:51 pm
Johno247
Member Since: 23 Dec 2018
Location: Horley
Posts: 56
Hi Pete,
I've just taken a photo of the Amp and the 'Ford' box that's under the drivers seat. I'll have a more in-depth look tomorrow to see where the cables run to.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum