EIG
Member Since: 12 Feb 2009
Location: Enniskillen
Posts: 329
|
2015 D4 SE Tech rear fixed camera retrofit |
|
I bought this vehicle which has a rear camera (6-pin - LR051728). I gather this is the fixed camera CAN bus connected version. It wasn't wired in, the correct tailgate looms were obviously not fitted as there are no 6-pin camera connectors present, I'd like to know firstly if this camera is suitable and if it is could someone point me to the correct looms I need for the tailgate.
I know the subject is very well covered on here, I have searched, but I can't find any reference to the part numbers for the looms I need for the 6-pin camera. Jim
D4 SDV6 SE TECH
2008 D3 TDV6 HSE G4 Challenge Vehicle
|
26th May 2019 10:51 am |
|
|
l00kin4
Member Since: 27 Feb 2015
Location: Sydney
Posts: 46
|
Hi Jim,
I responded in the other thread also but for the sake of completeness.
I had a quick look at this and for the fixed CANBUS camera, these should be the looms you need:
LR053163 - lower loom with the switch
LR052996 - upper loom
David
|
27th May 2019 6:06 am |
|
|
EIG
Member Since: 12 Feb 2009
Location: Enniskillen
Posts: 329
|
Thanks David - very much appreciated. Jim
D4 SDV6 SE TECH
2008 D3 TDV6 HSE G4 Challenge Vehicle
|
27th May 2019 7:20 am |
|
|