Member Since: 10 Jan 2019
Location: Kent
Posts: 114
Auxiliary Switches
Hi all,
I want to fit some auxiliary switches to my D3 they will control a discrete lightbar and some other lighting.
I have seen the SPod control panels and that looks good to me but it well over priced.
I’ve also looked at something similar to what I’m used in emergency vehicles which is similar and cheaper
Does anyone have anything like this fitted.
What are they like to fit and where did you fit the switches
Any advice would be greatly appreciated
Thanks2005 D3 SE Auto, zermatt silver
Gearbox flush by terrain vehicles
V8 brake upgrade
Will always ask silly questions
29th Mar 2019 2:57 pm
Sidestick
Member Since: 22 Apr 2012
Location: Rome
Posts: 2288
Here is a good solution
https://www.landroverpassion.com/en/produc...scovery-3/- Easy-Lift suspension module 4.0
- GoodWinch 9500 lb
- Full underbody protections
- Tree/Rock sidebars
- Prospeed roofrack & ladder
- Compressor guard
- Raised Air Intake
- Driving lights (2+4)
- 50 mm Waffle boards
- Altox Heater control
- Overland Rooftop Tent
- Rear seats entertainment
- Front & Rear camera
- GVIF
- Removable tow bar
- Cubby box fridge
- BFG KO2 265/65R17
- iidTool BT
29th Mar 2019 3:19 pm
Bleeding knuckles
Member Since: 10 Jan 2019
Location: Kent
Posts: 114
Interesting I’ll look at that and see if they can squeeze 8 switches in there2005 D3 SE Auto, zermatt silver
Gearbox flush by terrain vehicles
V8 brake upgrade
Will always ask silly questions
29th Mar 2019 7:21 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13705
Hi
I bought the last version in the picture , still got to get round fitting it
Where about in Kent are u if i may ask please, thks
29th Mar 2019 9:14 pm
Bleeding knuckles
Member Since: 10 Jan 2019
Location: Kent
Posts: 114
I was hoping to get at least 8 switches for my needs
I’m near Folkestone2005 D3 SE Auto, zermatt silver
Gearbox flush by terrain vehicles
V8 brake upgrade
Will always ask silly questions
29th Mar 2019 10:26 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13705
Many thks
If it’s any help Have seen switches put into the overheard light unit , so at least then u can fit all of ur switches u req
Their website says it's a DIN sized panel ... could you not cut a DIN blanking plate to suit your needs?.
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
30th Mar 2019 12:27 am
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1786
Looks like ver B is the max number of standard switches on a DIN panel - suppose you could get smaller switches or use double pole type where center is off and up is one thing and down is another thing
30th Mar 2019 12:35 am
PCT3
Member Since: 13 May 2017
Location: Kent
Posts: 144
As far as I can see it’s for smokers pack I have two auxiliary power points on mine, but suspect that it’s all the same behind.
I have an idea for a top of dash ‘shelve’ and is being looked at at present, if it’s possible will have place for switches and two way radio mount
I have four switches mounted overhead in front interior light cluster.Discovery 3 HSE 07
Discovery 1, Search & Rescue SE4x4 Responce
Fiat Decato motor home
Mazda MX5
30th Mar 2019 7:24 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13705
Hi
Interesting u mention the centre console
On the off chance I saw these that fit where the sat nav should be
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
... All LED interiors lights, DRLs, Spare Wheel protector.
