Lee Trinder
Member Since: 12 Aug 2018
Location: Henley in arden
Posts: 516
|
Hi, I’m trying to change the expansion tank due to faulty sensor and bleed screw won’t stay in under pressure. I can get everything off it, but the bottom hose looks impossible to get to, anybody got a tip?
|
30th Mar 2019 9:20 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10620
|
Remove headlight.
|
30th Mar 2019 9:35 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10620
|
You need to be quick swapung the bottom hose over else u look a lot of water out of rad
|
30th Mar 2019 9:36 pm |
|
|
Lee Trinder
Member Since: 12 Aug 2018
Location: Henley in arden
Posts: 516
|
Thanks Pete, sorry I should have been a bir clearer, I can get everything off, but the bottom hose looks unreachable. Any tips? Also although I can remove headlight I can’t get the plug out the back of it, the clips broken.
|
30th Mar 2019 10:09 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10620
|
Maybe you pull the tank up an inch or 2 to get to the hose.
I don’t remember it being too difficult
|
30th Mar 2019 10:44 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10620
|
If you have the bottle hose clip off
use a long flat blade screw driver to carefully work round the joint to part it.
Don’t split the hose though.
|
30th Mar 2019 10:49 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10620
|
I certainly removed the headlight when I did it.
|
30th Mar 2019 10:50 pm |
|
|