Member Since: 15 Apr 2015
Location: UK
Posts: 1683
Rear Wiper Problem - stuck halfway
I’m having the ‘stuck in the middle’ issue, accompanied by a whiny grinding noise. I replaced the wiper arm a few months ago.
The nut to secure the arm goes on fine so far, then is really hard to turn, before freeing up slightly.
If I remove the wiper arm, the spindle moves fine without any issues or noises.
Any thoughts?
4th Jun 2019 9:14 pm
mrluke
Member Since: 25 Oct 2018
Location: essex
Posts: 41
Did you replace with a "Newer" plastic version ?
18th Jun 2019 9:05 am
Scott #55
Member Since: 15 Apr 2015
Location: UK
Posts: 1683
I don't think so - it felt metally when I put it on.
18th Jun 2019 1:02 pm
mrluke
Member Since: 25 Oct 2018
Location: essex
Posts: 41
when you put the wiper arm on , was it in the resting position at the bottom ?
18th Jun 2019 1:13 pm
Scott #55
Member Since: 15 Apr 2015
Location: UK
Posts: 1683
It was. It worked fine for a good few weeks, then started to get slower before struggling to get past halfway. Eventually, it stuck in the vertical for quite some time, before resuming. Shortly after that, it wouldn't go past vertical and just stopped with the accompanying noise.
18th Jun 2019 1:18 pm
Ja92mie
Member Since: 16 Sep 2014
Location: Newquay
Posts: 1259
I had the same problem. I replaced the wiper motor and that solved the problem.
18th Jun 2019 1:19 pm
Scott #55
Member Since: 15 Apr 2015
Location: UK
Posts: 1683
I'm getting my Indy to source the motor for me. I'll do the swap myself (under supervision).
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum