Member Since: 16 Jan 2008
Location: Lausanne
Posts: 8
Lazy Entry
As a new owner I am a bit confused by the lazy entry linked to the remote controls.
I thought it meant that after programming different seat/mirror positions on two different remotes, these positions would be automatically selected when opening with the relevant remote. So if my wife locks the car with her remote, if I unlock it with mine wit would adjust to my seat position on opening the car.
This doesn't work though which makes me think I've misunderstood what lazy entry does or I have mis-programmed something.
Any ideas?
29th Jan 2008 3:41 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
It is supposed to work like you said
Have you switched on the lazy entry in the LCD settings menu ?G4 Gone ...but not forgotten
29th Jan 2008 4:17 pm
crews control
Member Since: 18 Mar 2007
Location: Dorset
Posts: 5011
If lazy entry is set to ON in the LCD settings menu, did you memorise the positions on the same seat memory for each key in turn? (ie mem1 with the first key in the ignition and then mem1 again for the second key.)
If you did then it should work???2005 D3 HSE 2011 D4 Landmark 2016 D4 HSE Lux
2017 Ford Tourneo VR46
Club Waitomo
29th Jan 2008 4:23 pm
SwissTony
Member Since: 16 Jan 2008
Location: Lausanne
Posts: 8
Oh dear I'm confused again. I thought the idea was that you program mem1 on one remote and mem2 on the 2nd remote.
Using key1 in the ignition, set the seat and mirrors to your preferred locations. Switch off and remove Key1.
Insetr key2 and set the seat and mirrors to your (her?) preferred locations. Switch off and remove Key2.
Whenever you unlock the car, the seat / mirrors should move to the positions stored for each key. Note that this setting is dynamic and hence works whenever you change the position and then get out of the car and lock it. It always remembers the last seat position used with the key in question........... I think...... The older I get, the more I realise that people confuse wrinkles for wisdom
Founder member of Club FFRRV
Club Orange, Mint or Fruit
Club Walnut Sniffers
29th Jan 2008 5:50 pm
SwissTony
Member Since: 16 Jan 2008
Location: Lausanne
Posts: 8
OK that is what I thought - except it doesn't work. When I adjust seat to her position, lock it with her key, and then open it with my key there is no movement.
29th Jan 2008 6:49 pm
Nigel Tracey
Member Since: 04 Nov 2006
Location: Lausanne
Posts: 395
ST,
Where in Lausanne ?Mrs Jones ? We've come for your Liver
29th Jan 2008 6:56 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Go for the memory 1 positions on each key ..as said before...
I had trouble at first ..but found this way worked G4 Gone ...but not forgotten
29th Jan 2008 7:40 pm
AndrewS Tarquin of the Desert
Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10441
And dont forget that if you drive an auto the adaptive box is also linked to the keys In the Beginning there was nothing, which exploded.
29th Jan 2008 7:45 pm
vladimir
Member Since: 31 Jan 2008
Location: St-Petersburg
Posts: 3
I have made experiments with this problem and I think , we have 2 keys: main 1 and spare 2.
For key 1 seat and mirrors position saved. For key 2 – not.
If you use key 1 after key 2 seat and mirrors will run in position for key 1. If you use key 2 nothing will happened.
Apologize for my English
31st Jan 2008 2:06 pm
SwissTony
Member Since: 16 Jan 2008
Location: Lausanne
Posts: 8
Problem Understood & Sorted
Dear All, Thanks for your replies. It is a strange logic but as per Wiggs' reply the trick is putting key 1 in the ignition and setting all 3 mem buttons to the same position for driver 1. Then with key 2 set all 3 mem buttons for driver 2.
Now when you unlock the seat adjusts automatically. You no longer need the mem buttons.
Thanks, SwissTony
8th Feb 2008 12:41 pm
baart
Member Since: 03 May 2007
Location: WARSAW
Posts: 136
apparently u need to program all memory positions first - this relates both to lazy entry and to side mirrors dip when reverse selected| Il boit pour oublier qu'il vit
Il dort pour oublier qu'il boit
C'est un bien triste
Un bien triste sort |
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
