Member Since: 16 Feb 2017
Location: Solihull
Posts: 71
Enable towbar or not in CCF file?
Hi all,
This might sound like an odd question to ask, but should I enable my LR towbar pack I installed or not? The reason I ask is that I don't actually use the towbar for towing, only for a bike rack which has a
large bag attached to the back with a bicycle then attached to this.
I assume that enabling the towbar pack just changes the following...
1. Disables reversing beep - I don't mind the beep noise.. it reminds me the bag is on there!
2. Disables rear fog on car - again I don't see this as an issue.
3. Engine acceleration / gearing change?... the weight is not an issue and I'd rather leave as is.
4. Any stability benefit? Again am not sure if this just happens anyway. You can tell the bag and bike are on the back but it causes no issues.
If I am missing something and I should enable it via the CCF via the Gap tool (which I have) then I will. I just don't see the point for my needs at this moment in time. 13 pin light board works properly etc. Any advice welcome
Thanks
Jonathan
6th Aug 2019 12:30 pm
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10352
if thats all you are using it for I wouldn't bother, as the changes in the CCF are only picked up when something is plugged into the towbar electrics, it doesnt detect a towbar being fitted.
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
6th Aug 2019 12:34 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4520
If the lights work, don't worry, nothing to fix!Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
6th Aug 2019 12:49 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18562
I would enable it, then if you ever do come to tow (or a future owner does) then it is set up correctly.06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
6th Aug 2019 1:00 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4520
Just out of interest Martin, what doesn't work if you don't enable?Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
6th Aug 2019 1:10 pm
mjom89
Member Since: 13 Sep 2011
Location: Essex
Posts: 593
On my D4 I had to enable it to:
* Disable rear parking sensors when a trailer is attached
* Enable the rear view camera to have trailer hook up mode - it draws a line from the towbar to assist with reversing and then zooms in to the tow bar when you are close
* Stop height changes when changing terrain response mode
There may well be other things it does but disabling the parking sensors was the most important to me!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
