Advertise on DISCO4.COM
Forum · Gallery · Wiki · Shop · Sponsors
DISCO4.COM > Faults & Fixes (D4)

Blind Spot Monitor Fault
Post Reply  Down to end
Page 1 of 1
Pete Hancock
 


Member Since: 11 Oct 2018
Location: Cornwall
Posts: 94

England 2016 Discovery 4 3.0 SDV6 Graphite LE Auto Yulong WhiteDiscovery 4
Blind Spot Monitor Fault

Well... took D4 in for service / MOT / TPMS fault......all done as per TPMS thread.

Also reported intermittent "Blind Spot Monitor System not available" warning.
Diagnostics ran , showed "Internal failure" re-calibrated, and customer to test..

Fault showed on the way home, but clear next day, until yesterday ( including towing caravan ).
...Yesterday home from work..(2 weeks later)....
First 8 miles, warning flashing on / off every 2 seconds !
Next 10 miles permanent fault, and on straight away this morning.

In to dealer for diagnostic and road test.......
Fitter said it went straight into fault as soon as he selected "Drive", glad it's no longer intermittent.
..."SODR Internal Failure" (Side Object Detection Right).

Read report sheet which advises test drive of at least 40 miles after re-calibration,
which explains the "Customer test" part of the process.

Booked in for new module to be fitted next week F.O.C. under warranty.

Switched off "Blind spot " system on dash menu for now, no warnings, yippee Very Happy
  
Post #206434027th Jun 2019 10:40 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO4.COM is independent and not affiliated to Land Rover.
Switch to Mobile Site