Member Since: 20 Jul 2019
Location: buderim
Posts: 4
polish chippy
hi guys, gals
thought I'd share
bit hard for me to fit one handed, plug on rail sensor but, gee this seller has literally 1000,s pos reviews eh uk to aus, 3 days and free postage
https://www.ebay.com.au/itm/222891497955
Click image to enlarge
he is so helpful too
20th Jul 2019 5:02 am
mick_n3
Member Since: 19 May 2017
Location: Kettering
Posts: 422
There you go saved you a load of cash,this is all that in them
https://www.ebay.co.uk/itm/5-X-1K-ohm-2W-M...cd06988c23
just increases the resistance to fool the ECU to think the air and engine temp is cold and fuel rail pressure is low, and hey presto a load of extra un metered fuel goes in.
The only way to safely do it is a proper ECU remap, well as safea s you can with an engine that is known to spin shells and break cranks.
His reviews will be from all the bolt on boy racers that just rag the their cars and don give a
M6NIO
20th Jul 2019 6:06 am
stuarth44
Member Since: 20 Jul 2019
Location: buderim
Posts: 4
i realize there is little in them, some are marketing them for big money at least this crowd knows they cost pennies to produce
as for bearing halves, LR changed supplier, hence no probs, engines that are square, oversquare or near it, well the brgs do not load as in long stroke thumpers, that is why f1 and moto gp engines rev 20k, as for boy racers, they do not have coin for d4, s
as for me, i,ll sit car in 6th cog and monitor fuel use, you DO see utes chipped to here, great clouds unburnt fuel all i'm seeking is 8.5 l 100 km, I drive light throttle always have, when dring a 60 tonne b double, i drive pyro,
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum