Member Since: 28 Apr 2013
Location: Crieff
Posts: 119
Air suspension and IID tool
Hi there can anyone tell me (have done a search cans find anywhere) if I can adjust the front suspension independently of the rear suspension as the front is to high by about 15/20mm?
Thanks
14th Aug 2019 7:13 am
Mikeyb
Member Since: 08 Nov 2016
Location: Maldon, Essex
Posts: 516
Yes, you can set up suspension height with IID. I'm not going to detail how as although aware, I have not actually done this myself.
Read the IID manual that you should have got with the tool (or download if you haven't) then search this forum. Plenty of old posts out there, but the manual will tell you most of what you need to know.Not such a Disco Newbie now!
IID BT
14th Aug 2019 7:22 am
Scott90
Member Since: 28 Apr 2013
Location: Crieff
Posts: 119
Hi thanks for your reply Mikeyb I haven’t bought one yet so don’t have the manual.
Bu what I wanted to know is can the front suspension be adjusted without adjusting the rear?
15th Aug 2019 2:15 pm
Iguana
Member Since: 14 Oct 2013
Location: 'Sunny' Zomerset
Posts: 9424
Current LR =
2015 RR Sport Autobiography
&
1992 Land Rover Defender Camper
- Gone but not forgotten:
MY10 D4 GS
MY05 Disco 3 'S'
MY14 FL2 HSE manual in Blue
MY15 Disco 4 HSE Lux in Santorini Black
MY08 Disco 3 SE manual in Buck Blue
1960 Series 2 88" (No idea why I sold it!)
15th Aug 2019 4:13 pm
Mikeyb
Member Since: 08 Nov 2016
Location: Maldon, Essex
Posts: 516
As I already said, I have not done it so cannot be sure. However from what I have read, you adjust each corner in turn so in theory, yes.
However, I have been playing recently with the test mode function of the IID in relation to suspension - this is where you can raise or lower each corner manually in turn (does not save positions but reverts to normal settings when exit'ed). What I did see from that is when you adjust the height of one corner manually, the opposite corner height position changes - makes sense if you think about it as in test mode the car is not compensating.
I don't think you will properly set up your suspension without doing all four corners.Not such a Disco Newbie now!
IID BT
15th Aug 2019 8:49 pm
robpenrose
Member Since: 12 Jan 2016
Location: Surrey / SW London
Posts: 2138
You need to follow the calibration procedure. You will also need a tape measure
Current: D4 HSE
Previous: BMW Z4M Coupe
Previous: Land Rover Defender 90 CSW Td5
Previous: Land Rover Discovery Td5 ES
15th Aug 2019 9:06 pm
Davethegeo
Member Since: 01 Oct 2015
Location: Edinburgh
Posts: 913
You will also need the latest firmware for the IID tool. I didn't have this and couldn't work out why everyone was talking about the suspension calibration procedure that looked very different to what was possible on my outdated tool.
Updated now, and I've seen the light.D1 300Tdi - gone
D2 Td5 ES (Alive remapped...mmm) - sadly gone
D4 2012 SDV6 XS - Stolen
D4 2014 SDV6 HSE - Shiny
15th Aug 2019 9:33 pm
DiscoJake
Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
Yes used to be some maths involved but now the app does it all for you
15th Aug 2019 11:59 pm
Scott90
Member Since: 28 Apr 2013
Location: Crieff
Posts: 119
Thank you all for your help that has answered my question it looks like I’ll be buying one next week.
16th Aug 2019 6:05 am
DiscoJake
Member Since: 23 Aug 2013
Location: Hereford
Posts: 1429
Member Since: 28 Apr 2013
Location: Crieff
Posts: 119
Thanks discojake
16th Aug 2019 7:26 am
RBB
Member Since: 19 Nov 2018
Location: Fife
Posts: 167
you can alter each axle independently, no tape measure needed !
Just go into the suspension page, call the setting you want something and unlock the small symbol that binds the two axles together, adjust front or rear, save and upload....
Do it fairly often when car/camping to try and level the car.....I just change the setting back to default when I drive off ( also have a +20mm all round for extra clearance off road)
16th Aug 2019 10:17 am
Scott90
Member Since: 28 Apr 2013
Location: Crieff
Posts: 119
Thanks RBB that’s the info I was looking for, much appreciate.
16th Aug 2019 10:58 am
robpenrose
Member Since: 12 Jan 2016
Location: Surrey / SW London
Posts: 2138
If you want to set the suspension up properly, and get it back to how it should be, you need a tape measure. The car doesn’t know the heights. You need to manually measure and adjust each corner to get the correct values.
The IID calibration steps you through the procedure and tells you where to measure and what measured values you need to achieve.
So to set the car up properly, use the suspension calibration, use a tape measure and get the wheel alignment checked after.
If you just eye it up, it won’t be correct.
Current: D4 HSE
Previous: BMW Z4M Coupe
Previous: Land Rover Defender 90 CSW Td5
Previous: Land Rover Discovery Td5 ES
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
