| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO4.COM as a guest - Register to take part or Log In
Godlykepower
Member Since: 23 Dec 2016
Location: Royston, Hertfordshire
Posts: 34
  
|
| What battery charger should I get? |
|
I’m going to order a Gap Diagnostic tool this week, and have been reading up and have seen that I’ll need to use a battery charger with it?
One was mentioned several times in a thread I found, but can’t find any longer....I think it was a CTEK?
What model of CTEK should I get, or is there something else I should consider?
Also, how do I actually set up this charger thing? Never used one before! Propelled across the land in a carriage of no horse drawn, belching Satan’s black wind into our clean and local air.
|
 20th Oct 2019 8:30 pm |
|
|
NJSS
Member Since: 06 May 2009
Location: Catherington, Hampshire.
Posts: 10808
 
|
Have a look at this thread:-
https://www.disco3.co.uk/forum/which-ctek-charger-149486.html
My view is that the MX10 is about right, although I bought a larger one.
NJSS Am I Gammon or Woke ? - I neither know nor care.
2016 Discovery 4 Landmark
2011 Mercedes Benz SL350 (R230)
1973 MG B GT V8 - 3.9L John Eales engine, 5 speed R380 gearbox, since 1975.
1959 MGA roadster - 1.9L Peter Burgess Engine - 5 speed gearbox
Past LRs - Multiple FFRs, Discos & a Series I - some petrol, some diesel,
none Electric or H2 fuel cell - yet.
There are 10 types of people in this world: Those who understand binary, and those who don’t.
|
| 20th Oct 2019 8:38 pm |
|
|
Godlykepower
Member Since: 23 Dec 2016
Location: Royston, Hertfordshire
Posts: 34
|
Thanks for that. I think that was the link I’d found initially.
Over on the D3 Facebook group, I’m being told that a battery charger is only necessary for the biggest updates, and not necessary most of the time?
Is this correct? Propelled across the land in a carriage of no horse drawn, belching Satan’s black wind into our clean and local air.
|
| 20th Oct 2019 9:05 pm |
|
|
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6754
 
|
Well.
Generalizing slightly most people seem to do updates without continuous power supplied from an external source. The risk is that if you run out of juice in the middle of an update you might be in trouble.
That being said, in general, updating is discouraged unless you have an issue you need to get fixed (like California stop) and it isn’t like there are new firmware updates coming. Most updates take a few minutes only. Same with editing CCF, it can be done without but it’s just a general precaution have the power source.
|
| 20th Oct 2019 9:24 pm |
|
|
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6754
|
If you’re on the side of the road and need to read codes.. then read the codes 
|
| 20th Oct 2019 9:25 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO4.COM Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO4.COM is independent and not affiliated to Land Rover.
