JamesJ
Member Since: 08 Aug 2021
Location: Downham Market, Norfolk
Posts: 87
  
|
| Tailgate handle threaded inserts |
|
Hi all, I had to reomve the rear tailgate handle due to switch failure which turned out to be a broken wire in the loom due to water ingress. In the process the 4 T30's which are underneath had to be removed and the brass inserts that they screw into became detached from the handle itself, again due to corrosion, is there a known fix/replacement for these or is it a new handle job?
|
 5th Apr 2023 4:18 am |
|
|
SteveKK
Member Since: 11 Apr 2019
Location: North Herefordshire
Posts: 287
 
|
I bonded the brass inserts back in with JB Weld. To be fair, I have not removed the handle since, but JB weld usually does a good job.
Regards,
Steve
|
| 5th Apr 2023 7:36 am |
|
|
mjom89
Member Since: 13 Sep 2011
Location: Essex
Posts: 593
 
|
I used rivnuts
|
| 6th Apr 2023 6:12 pm |
|
|
kajtzu
Member Since: 10 Aug 2017
Location: Helsinki
Posts: 6755
  
|
Two component glue worked fine… been there now for 3-4 years 
|
| 6th Apr 2023 6:39 pm |
|
|
